![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Different engine sound in 190XT´s ?? |
Post Reply ![]() |
Author | |
Dutchboy Johan ![]() Orange Level ![]() ![]() Joined: 14 Sep 2009 Location: Netherlands Points: 571 |
![]() ![]() ![]() ![]() ![]() Posted: 13 May 2010 at 3:15pm |
Is it right, that you can have a different sound of the engine when you have both the same engine, like the diesel version?
I´ve seen some video´s from different XT, all diesels and i notice that there is a deviation in engine sound. Is that right? And if it is soi, how is that possible? Come´s that by the muffler?
I´ve seen XT that you hear the turbo wistle, but also XT where it is more like a ROAARRR like a V8 or so.
Thanks.
|
|
---> Better by Design <---
Johan Straver, Almkerk/ Netherlands Allis-Chalmers 190XT Ser.III #26829XTD |
|
![]() |
|
Sponsored Links | |
![]() |
|
injpumpEd ![]() Orange Level Access ![]() ![]() Joined: 13 Sep 2009 Location: Walnut IL Points: 5112 |
![]() ![]() ![]() ![]() ![]() |
different turbo's were used over the years, as well as injection pumps with and without automatic timing advance. All these things can make them sound different. Also, audio sounds can be inconsistent. Ed.
|
|
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|
![]() |
|
niel ev ![]() Silver Level ![]() Joined: 04 Feb 2010 Points: 189 |
![]() ![]() ![]() ![]() ![]() |
Some of the diffence can come fromthe muffler and straight pipe also ther is some difference because of the different turbos that are used and then it is also probably the different house power out put the old ac mechanics had a habit of putting the screw to the pump and getting 120 horses out of the tractors Niel
|
|
![]() |
|
Steve Wilson ![]() Bronze Level ![]() Joined: 30 Sep 2009 Location: Mid Missouri Points: 11 |
![]() ![]() ![]() ![]() ![]() |
I put a new muffler on my 1968 190XT because the turbo whistle was so load and shrill above 1800 RPM that it caused me to use ear plugs. With the new muffler I can't hardly hear the turbo anymore. In fact, while it was later at the dealer's getting the injector pump and injectors rebuilt, I had them check out the turbo to see if it was still working properly. No joke.
Steve Wilson
Mid Missouri
|
|
![]() |
|
Dutchboy Johan ![]() Orange Level ![]() ![]() Joined: 14 Sep 2009 Location: Netherlands Points: 571 |
![]() ![]() ![]() ![]() ![]() |
I will put an other muffler on my XT. Normal it is also a straight steel pipe but i would like to put a chrome curved pipe on it. Curious what difference in sound it will be.
I would like to give it a more a 'roaarr' sound
|
|
---> Better by Design <---
Johan Straver, Almkerk/ Netherlands Allis-Chalmers 190XT Ser.III #26829XTD |
|
![]() |
|
dhexom ![]() Bronze Level ![]() ![]() Joined: 29 Oct 2009 Location: Blanchardville, Points: 43 |
![]() ![]() ![]() ![]() ![]() |
Put an over size pipe on it and that will give it more of a roar. I did this on my D-21 and it certainly did help it.
|
|
![]() |
|
Dean(IA) ![]() Silver Level ![]() Joined: 12 Sep 2009 Location: NE Iowa Points: 430 |
![]() ![]() ![]() ![]() ![]() |
My 2 cents worth, for what it's worth.
At about 7500 hours, some of the early 190XT tractors would have the cam gear break off the end of the camshaft. The only part available, was a 200 engine camshaft. It had different valve timing and overlap and it sure didn't sound like an XT after that. If you didn't explain it to the customer before hand, he could get really excited. |
|
![]() |
|
Dutchboy Johan ![]() Orange Level ![]() ![]() Joined: 14 Sep 2009 Location: Netherlands Points: 571 |
![]() ![]() ![]() ![]() ![]() |
Interesting to read all these story's. Thanks for it.
@ dhexom: What size of pipe did you use on you're D21?
|
|
---> Better by Design <---
Johan Straver, Almkerk/ Netherlands Allis-Chalmers 190XT Ser.III #26829XTD |
|
![]() |
|
niel ev ![]() Silver Level ![]() Joined: 04 Feb 2010 Points: 189 |
![]() ![]() ![]() ![]() ![]() |
Johan when we restore a tractor we get a 3 inch that swells out to 4 inch just above the hood sure sounds good Niel
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |