Hey Guys,,,The PO of my D15 II had welded a humongous hitch on this piece and it also had some pieces that had broken off and some that were cut off way back when.
I never could get the AGCO parts books to open using IE,, so I downloaded Firefox and problem fixed. (sent MS a nice email letting em know),,,The accompaning pic is my first try with "Snipping Tool" and hope it works,,,here is what I got,,
1. Piece #18 (PIN, draft arm & sway chain anchor)is stuck and no amount of heat and BFH will convince it to come out, will need to get on a BFP (press)! The other side came out with normal heat and beat,,,,
2. The PO had torch cut the ends off both of these PINS so I have no idea how long they were originally. The pic shows threads on both ends,,but what pitch?
3. On piece #19, what hooks on to tab looking up on right end?
4. I had to replace the broken off 3/8" pin on left end of piece #13. It hooks on to the long rod that hooks up to the lever under hydraulic reservoir.
5. I do not find a dwg in the parts books that shows the arrangements where and how the "sway chains" attach.
Thanks for any and all help,,,
CHIT,,,can't get pic to upload,,,, OK,,had to download software to convert PNG file from AGCO to JPEG,,,,sheesh,,,
Edited by desertjoe - 13 Sep 2015 at 8:47am
Topic Options
Post Options
Thanks(0)
Obviously, the PO didn't think much of the traction booster system cause when something broke they would just cut off the part and go on farming,,,,