![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
CA Making Noise |
Post Reply ![]() |
Author | |
Austin(WI) ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Wisconsin Points: 1460 |
![]() ![]() ![]() ![]() ![]() Posted: 07 Dec 2011 at 11:34am |
Hey Guys,
Hopefully someone on here will be able to diagnose this. When I was using my CA this past summer I noticed it always makes a howling noise when I would let off on either the foot clutch or the hand clutch BUT it only did it in 4th gear. At first I thought it was the throwout bearing, until I noticed it when I used the hand clutch. So for me it could only mean one thing, and that would be that it is something in the tranny. It only does it in 4th gear. It doesnt don't the whole time in 4th gear, just when you initially let off on either clutch. Any info would be much appreciated. Thanks! AF
|
|
"Better By Design"
|
|
![]() |
|
Sponsored Links | |
![]() |
|
Austin(WI) ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Wisconsin Points: 1460 |
![]() ![]() ![]() ![]() ![]() |
Bump
|
|
"Better By Design"
|
|
![]() |
|
wkpoor ![]() Orange Level ![]() Joined: 25 Apr 2010 Location: Amanda, OH Points: 825 |
![]() ![]() ![]() ![]() ![]() |
Tranny noises can be tough to figure out. Some might be normal and some might be a bearing going out. 4th will almost always make funny noises because things are spinning faster. One thing you can do is drain the oil and filter it to look for metal. After you drain it put a couple gallons of diesel in it and drive it around (no load) a while, then drain again. Depending on how dirty it is it might take a few flushes. Then refill with clean oil and monitor. I bought round strong magnets for all 3 drain plugs before to at least try and contain metal from going to the pump.
|
|
![]() |
|
wekracer ![]() Orange Level ![]() ![]() Joined: 13 Oct 2009 Location: Tebbetts, MO Points: 1590 |
![]() ![]() ![]() ![]() ![]() |
the final drives in ours howls when in 4th gear. but you can hear it come and go when it goes from holding back down hill to pulling up hill. that's the nature of strait cut gears. D15 does the same. they went to angle cut gears on the 17's and that took the noise out of the finals. without hearing that's the only thing i can think of.
|
|
![]() |
|
Austin(WI) ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Wisconsin Points: 1460 |
![]() ![]() ![]() ![]() ![]() |
So it could be a normal sound then?
|
|
"Better By Design"
|
|
![]() |
|
Austin(WI) ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Wisconsin Points: 1460 |
![]() ![]() ![]() ![]() ![]() |
bump
|
|
"Better By Design"
|
|
![]() |
|
Leon B MO ![]() Orange Level ![]() Joined: 12 Sep 2009 Location: Old Monroe, Mo Points: 2186 |
![]() ![]() ![]() ![]() ![]() |
Sounds like clutch chatter. Lots of these old tractors have a little vibration in the foot clutch when your starting out in 4th. The hand clucth in my CA mowing tractor will make a chattering sound occasionally, especially if I slip it a bit to much. Everytihing is worn some and has more play.
Leon B Mo
|
|
Uncle always said "Fill the back of the shovel and the front will take care of itself".
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |