400 series cultivator parts

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am wanting to put my four row, 400 series cultivator onto my D14, and I need the bracket that wraps around the front of the tractor.  The one I have is for a D17, and it's different; wider,  and has longer side pieces. I suspect that very few 4 rows were ever put on D14's, so parts are rare. I've put this out here before with no success,  but thought I would try again just in case someone missed it before. I know that I can fabricate some angle irons to make it work,  but would rather have it look nice and original. Thanks,  Darrel 

Edited by darrel in ND - 23 hours 46 minutes ago at 7:13am

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
darrel in ND Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 22 Nov 2009 Location: Hebron, ND Points: 8711	Post Options Post Reply Quote darrel in ND Report Post Thanks(0) Quote Reply Topic: 400 series cultivator parts Posted: 23 hours 47 minutes ago at 7:12am
	I am wanting to put my four row, 400 series cultivator onto my D14, and I need the bracket that wraps around the front of the tractor. The one I have is for a D17, and it's different; wider, and has longer side pieces. I suspect that very few 4 rows were ever put on D14's, so parts are rare. I've put this out here before with no success, but thought I would try again just in case someone missed it before. I know that I can fabricate some angle irons to make it work, but would rather have it look nice and original. Thanks, Darrel Edited by darrel in ND - 23 hours 46 minutes ago at 7:13am

Sponsored Links