A/C 3500 generator 60kv

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Original poster might also have injectors installed backwards as they should be Bosch injectors in 1985. They will fit either way, but only one way is correct.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 21650	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Topic: A/C 3500 generator 60kv Posted: 28 Aug 2014 at 5:14pm
	Original poster might also have injectors installed backwards as they should be Bosch injectors in 1985. They will fit either way, but only one way is correct.

Sponsored Links

cw utah Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 28 Aug 2014 Location: Utah Points: 2	Post Options Post Reply Quote cw utah Report Post Thanks(0) Quote Reply Posted: 28 Aug 2014 at 3:56pm
	I have a model 3500 Allis Chalmers engine in a 60 kw gen set also. I just got it and am in need of any information I can find. Would you have time to tell me what you know about this unit. Carl 801-330-7393

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 21650	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 19 Aug 2014 at 9:29pm
	Which injection pump is it??? Stanadyne/Roosa-Master??....or American Bosch ?? pictures would be nice.

joekbyme Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 15 Aug 2014 Location: west haven ct Points: 2	Post Options Post Reply Quote joekbyme Report Post Thanks(0) Quote Reply Posted: 15 Aug 2014 at 4:17pm
	I am working on a 1985 3500 60kv genset.It came to me with the fuel tank and injection system filled with water.I thawed out the entire machine.Had the pump and injectors rebuilt.I reinstalled the pump at 28 degrees.btdc as it was when i removed it.The unit smoked but not to bad.It had no power under load.I pulled a comp test found #4 weak #5 40 lbs.Pulled the head these two pistons were melted the other 4 perfect.I pulled the engine and installed an overhaul kit .Had the head done.Reassembled and started.The engine smokes more than it did before.No longer white,light blue wet fuel smell like a cold two stroke detroit.It does not improve with operating temp increase.What is the correct timing procedure foe this engine? I have had no luck in finding manuals.It also cranks longer than i would like to start. Thanks joekbyme kyme Edited by joekbyme - 15 Aug 2014 at 4:37pm