| Author |
 Topic Search  Topic Options
|
moco27 
Bronze Level
Joined: 01 Aug 2021
Location: Bunker MO
Points: 3
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: HD5 lift cylinder packing
Posted: 01 Aug 2021 at 7:31pm |
|
I have an HD5 with a blown seal in a bucket lift cylinder that I need to repack. What size is the packing and where is the best place to get it?
|
 |
|
Sponsored Links
|
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 41867
|
Post Options
Thanks(0)
Quote Reply
Posted: 01 Aug 2021 at 8:43pm |
|
It's a V ring packing that is split ring , one lower backup ring and I believe 5 v rings .
Measure the shaft diameter and can get it from a hydraulic shop or try McMaster Carr
Save old rings as as packing wears you can add a additional ring to get more compression on present rings .
To get a sample and size - remove the 2 bolts from gland - raise brass gland from cylinder - then fish out old packing rings with a packing ring hook - ( small corkscrew )
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 1001
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2021 at 6:31pm |
|
I check tomorrow but should have the cylinder packings for HD5
|
|
moco27
Bronze Level
Joined: 01 Aug 2021
Location: Bunker MO
Points: 3
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2021 at 2:46pm |
|
the packing that was in there was an impregnated rope but the rope comes in different sizes and the place where I get it said they need to know the size. The packing that is in there now may have been someone improvising but I have no way of knowing.
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 1001
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2021 at 7:15pm |
|
I check todays and have some packing but not sure they look for the rod approximatif 2 inchs but have no parts number on and should have maybe 25 on racking in box
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3800
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2021 at 7:20pm |
|
i just redid the cylinders on my early hd6 a year ago. local hydraulic shop got me all the v ring packings and seals no problem.
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
nella(Pa)
Orange Level Access
Joined: 11 Sep 2009
Location: Allentown, Pa.
Points: 3114
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2021 at 7:55pm |
|
|
|
Coke-in-MN
Orange Level Access
Joined: 12 Sep 2009
Location: Afton MN
Points: 41867
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Aug 2021 at 12:56am |
It's a V ring style lowest one is a flat one side a V on top it's the first ring that shapes the other 5 rings above it to keep shape for the upper gland that is also V shaped Sounds like someone added rope style to take up room and the expand old packing enough to keep the leaking small . i did that on a telescoping cylinder on one dump truck until I got new V rings to install . That 2" mentioned above sounds about right size
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|
