Ac b1 rear end problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Was out with my son on the b1 today and let out brake/clutch pedal went a foot and stopped, looked it over no strange noises drive belt good the shaft with the (not shur what its called) round housing with gears in it,on right side if looking at from the rear turns but axle does not, is there a gear inside on the shaft that has a keyway or a pin trough it that could of sheered off.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
chuck (WI) Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 07 Feb 2010 Location: wisconsin Points: 200	Post Options Post Reply Quote chuck (WI) Report Post Thanks(0) Quote Reply Topic: Ac b1 rear end problem Posted: 02 Apr 2017 at 11:39pm
	Was out with my son on the b1 today and let out brake/clutch pedal went a foot and stopped, looked it over no strange noises drive belt good the shaft with the (not shur what its called) round housing with gears in it,on right side if looking at from the rear turns but axle does not, is there a gear inside on the shaft that has a keyway or a pin trough it that could of sheered off.

Sponsored Links

Dakota Dave Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: ND Points: 3965	Post Options Post Reply Quote Dakota Dave Report Post Thanks(0) Quote Reply Posted: 06 Apr 2017 at 10:25pm
	That's the differential there is a sun gear and I think it was 4 planet gears in there. The sun gear is keyed to a shaft that runs all the way to the wheel on the other side. The two bolts goin in at an angle press against a nylon bushing that provides limited slip action. The planet gears run on very small pins. It's not very complicated once you take it apart it's pretty easy to figgurout what's wrong. The ones I've had apart the shaft that runs to the other wheel the key way the sun gear sits on has been very trashed. The collar on the outside end keeps the inner axle from sliding out. Once you pull that the differential it's self is keyed to the outer axle.and it slides off. You can lock the diff by turning one ov the planet gears upside down.

chuck (WI) Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 07 Feb 2010 Location: wisconsin Points: 200	Post Options Post Reply Quote chuck (WI) Report Post Thanks(0) Quote Reply Posted: 07 Apr 2017 at 12:01am
	Thanks for the info dave,haven't looked at it yet, going to tie into er this weekend.