![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Throttle issue |
Post Reply ![]() |
Author | |
Kdelucca ![]() Bronze Level ![]() ![]() Joined: 29 Mar 2024 Location: Kentucky Points: 5 |
![]() ![]() ![]() ![]() ![]() Posted: 29 Mar 2024 at 6:25pm |
just pick up allis Chalmers D17 series 11 gas tractor don’t know much about it having issues with the throttle, at idle it runs full throttle at full throttle it idle . Is there an easy fix or do I need to open Governor control?
|
|
![]() |
|
Sponsored Links | |
![]() |
|
steve(ill) ![]() Orange Level Access ![]() ![]() Joined: 11 Sep 2009 Location: illinois Points: 78551 |
![]() ![]() ![]() ![]() ![]() |
did someone put an aftermarket carburetor with the lever pointed in the wrong direction ?
|
|
Like them all, but love the "B"s.
|
|
![]() |
|
Kdelucca ![]() Bronze Level ![]() ![]() Joined: 29 Mar 2024 Location: Kentucky Points: 5 |
![]() ![]() ![]() ![]() ![]() |
I believe it’s the correct carb . I did check it’s tsx853
|
|
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 19713 |
![]() ![]() ![]() ![]() ![]() |
I'm having a difficult time wrapping my head around this one. When the hand throttle is pulled down to a horizontal position (3 o'clock), it should have pulled rearward on the linkage that runs down the right side of the engine. This action stretches the governor spring inside the timing cover causing the governor to make the engine go to 2,000 RPM high idle. Going up to the 1 o'clock position with the hand throttle idles the engine down to slow speed as the linkage has moved forward alongside the right side of the engine. How or why anyone could reverse this linkage action is beyond me. Pictures of the carburetor and the left side of the engine might be helpful.
Edited by DrAllis - 30 Mar 2024 at 7:15am |
|
![]() |
|
Kdelucca ![]() Bronze Level ![]() ![]() Joined: 29 Mar 2024 Location: Kentucky Points: 5 |
![]() ![]() ![]() ![]() ![]() |
when the hand throttle is moved to the 3 o’clock position the linkage moved to the rear of the tractor I will send pic later thanks
|
|
![]() |
|
truckerfarmer ![]() Orange Level Access ![]() ![]() Joined: 26 Jan 2013 Location: Watertown, SD Points: 3188 |
![]() ![]() ![]() ![]() ![]() |
3 o'clock is full throttle. 12 o'clock is idle.
|
|
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
|
![]() |
|
Kdelucca ![]() Bronze Level ![]() ![]() Joined: 29 Mar 2024 Location: Kentucky Points: 5 |
![]() ![]() ![]() ![]() ![]() |
ok thanks
|
|
![]() |
|
DrAllis ![]() Orange Level Access ![]() Joined: 12 Sep 2009 Points: 19713 |
![]() ![]() ![]() ![]() ![]() |
Still waiting for a reply.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |