| Author |
 Topic Search  Topic Options
|
kellybench 
Bronze Level
Joined: 03 Aug 2011
Location: Oregon
Points: 2
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: WD 45 hand clutch
Posted: 03 Aug 2011 at 5:57pm |
|
The hand clutch lever on this WD45 will fall forward. The brake-over or de-dent is not strong enough to hold the hand clutch lever back. What is the problem and the fix. The clutch works good, releases and hold fine.
|
 |
|
Sponsored Links
|
|
|
Dusty MI
Orange Level
Joined: 13 Sep 2009
Location: Charlotte, Mi
Points: 5060
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2011 at 6:16pm |
You ought to get an owners manual, from one of the guys that advertise on here or from your nearest AGCO Allis dealer.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
Dakota Dave
Orange Level
Joined: 12 Sep 2009
Location: ND
Points: 3972
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2011 at 6:29pm |
|
The breakover is at the throwout bearing. remove the battery oval cover and check for .0035 clearance withe the clutch released. If its not beaking over the clearance is to tight. it is possable someone has messed with the clutch linkage adjustment. it should be set to the correct lenght and left alone. I don't have a book handy to look it up now.
|
|
Flint23
Orange Level
Joined: 31 Jan 2011
Location: New Haven In
Points: 429
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Aug 2011 at 8:32pm |
|
when you pull the hand clutch back does it hit the safty knock out device? it's the v shaped thing that the clutch handle slides between when ingaged.That might need to be adjusted.
|
|
been there done that, not doing it again...
|
|
BennyLumpkin
Orange Level
Joined: 22 Mar 2010
Location: Centre Hall, PA
Points: 2657
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Aug 2011 at 9:27pm |
 Flint23 wrote:
when you pull the hand clutch back does it hit the safty knock out device? it's the v shaped thing that the clutch handle slides between when ingaged.That might need to be adjusted. |
Sounds like you're referring to a Rock Clutch and that was an option, not standard equipment.....Either the clutches, or linkage are out of adjustment or the clutch pack is getting weak.....Check adjustments and go from there.....
|
|
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110
|
|
TedBuiskerN.IL.
Orange Level
Joined: 11 Sep 2009
Location: Davis, IL.
Points: 1959
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2011 at 10:47am |
|
The spring washer could also be going bad.
|
|
Most problems can be solved with the proper application of high explosives.
|
|
one54dodgetruck
Silver Level
Joined: 25 Jul 2011
Location: Chehalis, wa
Points: 399
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2011 at 12:14pm |
|
how big of a deal is it to replace the hand clutch, and is there a coupler to eliminate it?
|
|
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd
|
|
kellybench
Bronze Level
Joined: 03 Aug 2011
Location: Oregon
Points: 2
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Aug 2011 at 2:53pm |
|
Thank you all for your response to my question on the hand clutch. I used the advice of the explosives, not really. The hand clutch lever was adjusted to far forward.
|
|
