This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
AC disc repair |
Post Reply |
Author | |
onestout
Bronze Level Joined: 20 Jul 2019 Location: Hudson, WI Points: 4 |
Post Options
Thanks(0)
Posted: 20 Jul 2019 at 5:44pm |
New to the forum, first time post. I have an older 14' wide disc (not sure which model it is, no tag or marking) and I lost 1 gang. bearing holder and shaft broke. I like my older AC stuff but I'm having a hard time finding parts for this. Is it worth it to try and salvage or would I be better parting it out and find a different disc (tough to answer that)? The shaft is a 1" hex. It's too bad, it sure worked good when it was working. I saw the pinned thread on the bearing rebuild, does that work for the Hex shaft as well? Thanks
|
|
Sponsored Links | |
rtwfarm
Orange Level Joined: 26 Feb 2012 Location: nebraska Points: 1251 |
Post Options
Thanks(0)
|
I have a couple of parts disks. Give me a call Ryan 402-469-1738
|
|
orangereborn
Orange Level Joined: 12 Sep 2009 Location: NW WI Points: 1403 |
Post Options
Thanks(0)
|
Welcome to the forum...I am at Somerset/New Richmond...Dale
|
|
Allis dave
Orange Level Joined: 10 May 2012 Location: Northern IN Points: 2855 |
Post Options
Thanks(0)
|
The round and hex balpak bearings are the same. The bearing has an inner sleeve that pressing out. It can be either a round or hex sleeve.
|
|
TimNearFortWorth
Orange Level Joined: 12 Dec 2009 Points: 2014 |
Post Options
Thanks(0)
|
If the rest of the unit is solid, frame, axle mounts, hitch and not all cobbled up with old welds, you can look at replacement gang assemblies.
Numerous supply companies can supply the entire gang with hanger brackets that can be welded directly to your frames. Pick common carriers that are easy to reach for lubing, blade type, size/thickness and hangers, just watch you do not oversize what it originally had as too aggressive will not last as some of those older discs had pretty light frames.
|
|
onestout
Bronze Level Joined: 20 Jul 2019 Location: Hudson, WI Points: 4 |
Post Options
Thanks(0)
|
Thanks for the responses. I am looking into our options. I am guessing the other bearing and shafts are going to be in the same condition but it was raining so I didn't have a lot of time to look at it. Overall the frame and everything seems to be in pretty good shape. Any help on the model #?
|
|
Tenn allis
Bronze Level Joined: 24 Nov 2016 Location: Tennessee Points: 126 |
Post Options
Thanks(0)
|
Looks like a 2300 old style hangers and bearings Frame looks to be in good shape
|
|
Lonn
Orange Level Joined: 16 Sep 2009 Location: Назарово,Russia Points: 29773 |
Post Options
Thanks(0)
|
Is it a 2200 disk? Dad has a 2200 in the weeds that I intend to restore some day but they are prone to breaking the hex spindle axle.
|
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink I am a Russian Bot |
|
orangereborn
Orange Level Joined: 12 Sep 2009 Location: NW WI Points: 1403 |
Post Options
Thanks(0)
|
|
|
onestout
Bronze Level Joined: 20 Jul 2019 Location: Hudson, WI Points: 4 |
Post Options
Thanks(0)
|
thanks for all the replies. I will figure out what I need and get in touch with you. Great site and good to see the old stuff kept up. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |