| Author |
 Topic Search  Topic Options
|
Algar The AC 
Bronze Level
Joined: 24 Apr 2018
Location: Essex
Points: 3
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: New Owner General Questions
Posted: 24 Apr 2018 at 1:25pm |
Hi, Just become a proud owner of my 1st Vintage Tractor & Allis Chalmers B. However I am now after some advice.....
A) Can anyone advise what the majority of threads are. i.e. UNC or UNF....
B) What the "Petrol' Fuel tank mounting nuts are.
C) Should the tank be mounted with a rubber spacer.
D) What the thread on the manifold for the heat shield are. Sorry for the amount of questions but i am a complete fresher on these tractors..... Thanks.
|
 |
|
Sponsored Links
|
|
|
DaveWisc.
Orange Level
Joined: 11 Oct 2009
Location: Wisc.
Points: 1015
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 1:35pm |
|
Most bolts will be UNC. As to bolt size not sure either 5/16 or 3/8 . Does not have a rubber mounting that I know of. I put a strip of light belting on the bottom of mine.Wecome to the Allis Web Site there is a wealth of information on here don’t be afraid to ask questions.
|
|
The Consultator
Silver Level
Joined: 19 Sep 2017
Location: Rio Rancho, NM
Points: 120
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 1:47pm |
Congratulations on your tractor! I got my first (also a B) last September. This site has helped me tremendously! I'm not sure if these will help, but here is what there are for parts on the tank. http://stores.djstractorparts.com/fuel-tank-webbing-tan-1-3531t51/The webbing can go under the strap and help fight abrasion. http://stores.djstractorparts.com/cap-screw-bolt-block-for-fuel-tank-radiator-straps-allis-chalmers-b-ib-c-ed40-wf-wc-rc-wd-wd45-70202132/Currently, my B doesn't have the proper hardware for mounting the tank, but the screws I have work fine. I can't remember off the top of my head what the 'nuts' are on mine, but they are either welded or otherwise attached to the tractor.
Edited by The Consultator - 24 Apr 2018 at 1:50pm
|
|
1939 Allis-Chalmers "B" restored in 2010- very good condition.
|
|
txtractorguy
Bronze Level
Joined: 02 May 2016
Location: TX
Points: 23
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 2:14pm |
According to the parts manual I have, the mounting hardware for the fuel tank strap were originally as follows.
Prior to tractor B-58401: 4 washers and 2 screws (these two screws, p/n 202132, are the same as those given in the link in the above post)
Tractor B-58401 and up: 2 of 3/8" x 1-3/4" square head bolt, UNC 2 of 3/8" medium lock washer 2 of 3/8" hex nut
Edited by txtractorguy - 24 Apr 2018 at 2:17pm
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5909
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 2:16pm |
|
Hi Algar
Welcome to the Allis Chalmers Forum.
Seeing that you used the word Petro, are you in Essex County in the UK.
Next thing to determine - is yours an English B, assembled in the UK, or an American B.
You can determine that from the Tractor Serial Number, stamped in to the transmission Housing next to the gearshift.
English B will start with EB ...
Gary
|
|
The Consultator
Silver Level
Joined: 19 Sep 2017
Location: Rio Rancho, NM
Points: 120
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 2:21pm |
|
...And that's why I love these guys!
|
|
1939 Allis-Chalmers "B" restored in 2010- very good condition.
|
|
Bill Long
Orange Level
Joined: 12 Sep 2009
Location: Bel Air, MD
Points: 4556
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 2:31pm |
Algar, Welcome to the Unofficial Allis Chalmers Forum. You will find a
wealth of information here. Do not hesitate to ask. We are all
interested in keeping the name Allis Chalmers alive. I am so pleased
that you have my favorite Allis Chalmers Tractor, the B. I was honored
to work with my father, an Allis Chalmers Dealer, for the life of the
unit. It was our top seller. The questions you asked have already
been answered. However, I do recall the web straps that were in place to cushion
the gasoline or Petrol tank. I will enclose a picture of me with a B and my son to show what an American B looks like. Let us know how it goes. It will be our pleasure to be of service. Good Luck! Bill Long 
|
|
Algar The AC
Bronze Level
Joined: 24 Apr 2018
Location: Essex
Points: 3
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 2:52pm |
Thanks All, Very useful information.
He is a UK Build Vehicle & Yes Is in Essex UK.
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5909
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 3:52pm |
Algar I would recommend you get a Manual for your 'B'. Lots of good info. for a first time owner. Here is a link to one on Ebay. It is for a US assembled 'B', but would still have lots of info. This is the better of 2, it has Operating Instructions as well as Parts Illustrations. Gary https://www.ebay.ca/itm/Vintage-ALLIS-CHALMERS-Model-B-TRACTOR-OWNERS-OPERATORS-MANUAL-TPL-28M/222767148073?hash=item33ddf4ec29:g:1K4AAOSw-jFaPq8p
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5909
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 4:05pm |
|
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 54670
|
Post Options
Thanks(0)
Quote Reply
Posted: 24 Apr 2018 at 5:25pm |
I know, on the 'merican ones, that a boy scout belt is a decent substitute, for the webbing... 
|
|
cdon_FL
Silver Level
Joined: 15 Aug 2016
Location: NE Florida
Points: 116
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Apr 2018 at 4:20pm |
welcome to the forum. Happy to have you aboard ! My 92 year old father in law still uses his B model to mow his place. They are fine little tractors.
|
|
Chris in NE Florida
|
|
