| Author |
 Topic Search  Topic Options
|
KJCHRIS 
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 979
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: AC 200 or 7000 heavy wheel wgts.
Posted: 16 Nov 2017 at 8:38pm |
Can anyone say if weights # BW 176 B cast in them will fit the power adjust 38" inner hubs on late 200 or early 7000?? Guessing they weigh 800lb plus each, should replace fluid and eliminate corrosion. From an auction, I've a set of NOS 16 X 38 P A rims and would like to mount tires on them w/o fluid in them.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
 |
|
Sponsored Links
|
|
|
Ron(AB)
Orange Level
Joined: 27 Dec 2009
Location: Alberta
Points: 962
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2017 at 1:14am |
|
Have you got a picture of them?
I'd like to see a 800 lb weight.
An Allis 800 lb weight?
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12319
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2017 at 7:04am |
|
800lbs? Wow...I bought what I thougt were heavy wheel weights for my 7045. They are a solid donut/ring you mount on the inside of the wheel. They weigh ~300. I can't imagine dealing with something over 2x that weight.
Edited by Tbone95 - 17 Nov 2017 at 7:05am
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 979
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2017 at 7:17pm |
|
That's what the owner said he thinks they weigh. All I've seen is a couple pics. Will know more about them after Sunday, going to look at them.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
SteveMaskey(MO)
Orange Level
Joined: 11 Sep 2009
Location: Wellsville, MO
Points: 627
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2017 at 7:50pm |
|
I was down at Cooks in Clinton, MO getting some parts and seen some inside weights for a 70 series tractor that probably weigh 800 lbs. They were about 3 times as thick as the standard inside weight that goes on these tractors
|
|
jiminnd
Orange Level
Joined: 16 Sep 2009
Location: Rutland ND
Points: 2316
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2017 at 8:46pm |
|
I think the ones on my D21 were 600 pounds, not sure but that was what I was told.
|
|
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 979
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Nov 2017 at 9:22pm |
The 4 weights on the 200 now are; 3" thick, 10" ID hole and 25" OD. say BW 254136 2 on them, I'm sure they're 100+ each, seemed like a lot more when I put them on by myself. Owner of them says What I'm looking at; BW 176 B, are same 10" center and 25" OD and almost 18" thick, so yes they are probably closer to 600 than 800 lbs.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12319
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 8:34am |
|
Dang. Yeah if they’re all one piece 18” thick, I’m sure they weigh all of that!
|
|
nickia
Orange Level
Joined: 11 Sep 2009
Location: alden iowa
Points: 792
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 9:14am |
|
chris if your around williams hit me up i have a set on my 7040 if you want to take a look? 641-373-0467
|
|
Dakota Dave
Orange Level
Joined: 12 Sep 2009
Location: ND
Points: 3973
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 1:12pm |
|
Steel is 490 lbs per cubic foot. You've got 3 cubic feet of steel in 18" think ones. The ones on my 190 are a foot thick and are suposed to be 1000 ea.
|
|
DougS
Orange Level
Joined: 03 Nov 2011
Location: Iowa
Points: 2490
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 2:06pm |
How do you even mount those unless you have a fork lift or good sturdy engine hoist?
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 979
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 6:55pm |
|
Buddy has BIG old forklift, rated at 12K lift. It'll lift the rear of my Case 1175 with fluid in tires, & dry clamp-on duals on.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4572
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 7:02pm |
|
I bought a aftermarket set from a friend in PA. 1100 lb outer and 1500 lb inners all on one D-21! Have the 1500 lb inners on my 220 2wd.
|
|
Nothing is impossible if it is properly financed
|
|
1951WDNWWI
Bronze Level Access
Joined: 11 Jul 2011
Location: NW Wisconsin
Points: 118
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2017 at 8:53pm |
|
Even the smaller tractors can have impressive wheel weights. My WD Allis has one weight on each rear wheel that weighs 400 pounds. It is about three times the thickness of the Allis wheel weights. They were made by the Rowe Foundry in Martinsville, IL. I called and inquired what they weigh and the person at the desk told me they get frequent calls about the tractor wheel weights.
|
|
