This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Mild WC build |
Post Reply |
Author | |
48ACWD
Silver Level Joined: 06 Jan 2013 Location: Pennsylvania Points: 208 |
Post Options
Thanks(0)
Posted: 25 Feb 2016 at 9:48am |
I gotta an unstyled WC with a 201 motor. It has a 4 1/8 bore with flat tops and I'm adding a 45 crank shaft. What carb should I use and what kinda horsepower should I expect. Thanks.
|
|
Sponsored Links | |
CAL(KS)
Orange Level Joined: 18 Sep 2009 Location: Chapman, KS Points: 3747 |
Post Options
Thanks(0)
|
probably the easiest would be a Tsx-464 which is a WD45 carb or the D17 equilivent i dont know the number
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
|
Charlie175
Orange Level Joined: 11 Sep 2009 Location: Shenandoah, VA Points: 6353 |
Post Options
Thanks(0)
|
What brand of flat tops? Some don't offer as much compression as stock so HP may be lost.
You can fit a D19 carb on the manifold with some mods to the bolt holes. Your manifold may not work if it is an older one as I think it is smaller than a D17 style
|
|
Charlie
'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
|
48ACWD
Silver Level Joined: 06 Jan 2013 Location: Pennsylvania Points: 208 |
Post Options
Thanks(0)
|
I'm not real sure yet on the brand of flat tops. This motor was put together not long ago by someone else with all new parts. I haven't had it long at all and found the webs are split between the sleeves letting coolant in the oil. I'm transferring everything into a donor block and wanting to add some compression with a 45 crank. Just wondering if I should do anything else while it's apart and what carb to feed it with. Thanks
|
|
AaronSEIA
Orange Level Joined: 11 Sep 2009 Location: Mt Pleasant, IA Points: 2537 |
Post Options
Thanks(0)
|
Depending on the pistons, you will need new ones. The piston pin hight determines the compression ratio. The crank will drop right in and the rods will work. Pistons might interfere or have sky high c/r.
AaronSEIA |
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 19668 |
Post Options
Thanks(0)
|
If the sleeves have ANY ring edge in them, you cannot install the WD-45 crankshaft and shove the pistons up past the ring edge. If you don't have a WD-45 manifold or newer, you need one.
|
|
48ACWD
Silver Level Joined: 06 Jan 2013 Location: Pennsylvania Points: 208 |
Post Options
Thanks(0)
|
I would be interested in buying a wd45 manifold and carb if anyone has something they want to sell. thanks
|
|
Steve in NJ
Orange Level Access Joined: 12 Sep 2009 Location: Andover, NJ Points: 11591 |
Post Options
Thanks(0)
|
I have a TSX464 rebuilt done ready to install. Its all stock, not tricked up or anything if interested. I can always message it a tick also if need be for pullin'...
Steve@B&B |
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
WF owner
Orange Level Joined: 12 May 2013 Location: Bombay NY Points: 4442 |
Post Options
Thanks(0)
|
Steve, I didn't know you moonlighted as a masseuse...
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |