13,500# farm stock allis?

Hey I'm interested in what allis would be a good tractor for a farm stock 13,500# class. 12mph 3,000 rpm. Thanks for your help

Yup a 210 will work out real nice for ya

I'd think a 7060 or 7080 would be sweet.  I think the 7080 was counterbalanced, so it might take the extra rpm better.  Find a way to make the torque limiter hang on and you should be good to go.  Shouldn't be too hard to get any of the 7000's down to 13,500.
AaronSEIA

Yup a 210 with 7000 series metal would be perfect, 7000 series had all the Pd clutches, and the torque limter on the main clutch to cause slipping,,, 210 all gears after the engine clutch

Edited by DougG - 20 Aug 2015 at 7:50pm

How would a D21 do for this class?

So I've came across a 7060 at real good price. How will it do in this class with the tranny and all? Trans and clutch seem to be in very good shape. And what could be done with tractor to give it a little more hp for now. Trying to stay on a budget for now.

used to pull our 7040 with great results

Now 4500 will make you compete in that class with a 210 3500 on pump line and injectors and 1000 on a s362 turbo and hang on. Not trying to discurage you just letting you know what it takes to compete in my area anyhow. Your area may be different also speed limit makes a huge difference what's comen in your area 10 12 18 mph or open speed limit classes will help .
Just reread 12 mph the ih guys are still strong in that range if possible do pump lines and injectors also turbo you won't be sorry

Edited by 7040 - 02 Feb 2016 at 7:11pm

I remember years ago JoeIA's family ran a late model 7060 and had great results with it.

I believe there has been some confusion here. We are building 210 for these class. I am looking for a good clutch though for farm stock pulling, maybe a steel flywheel? What's best to use in a single disc setup?