![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
My HD11 |
Post Reply ![]() |
Author | |
Steve allis dozer ![]() Silver Level Access ![]() Joined: 10 Apr 2011 Location: Australia Points: 232 |
![]() ![]() ![]() ![]() ![]() Posted: 15 Jan 2016 at 8:35pm |
![]() |
|
![]() |
|
Sponsored Links | |
![]() |
|
Steve allis dozer ![]() Silver Level Access ![]() Joined: 10 Apr 2011 Location: Australia Points: 232 |
![]() ![]() ![]() ![]() ![]() |
second try
![]() |
|
![]() |
|
JohnCO ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
![]() ![]() ![]() ![]() ![]() |
Getting smaller!
Nice looking machine, like that ripper! |
|
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
|
![]() |
|
HD6GTOM ![]() Orange Level ![]() ![]() Joined: 30 Nov 2009 Location: MADISON CO IA Points: 6627 |
![]() ![]() ![]() ![]() ![]() |
Ya can unload her here at my place any day. Would only borrow it for a couple of months. Looks great😊
|
|
![]() |
|
Ian Beale ![]() Orange Level ![]() Joined: 03 Oct 2011 Location: New South Wales Points: 937 |
![]() ![]() ![]() ![]() ![]() |
I'm guessing a Standen swivel tyne?
Rules in Oz were that import duty was less if you added local made gear. So IH used BE gear made here under license by Armstrong Holland. Cat did the same (Steelweld?). Not sure who Allis used - a neighbour has PacAce rippers. Oliver seemed to be attached to Britstand and user comments is that they made good gear. I was warned when getting cutting edges for the blade of our FA 10 to be VERY definite if it was 6 inch spacing or 150 mm. It was inch spacing and has a similar swivel tyne ripper. We've now backwards engineered the numbers for hydraulic bits and ripper boots |
|
![]() |
|
DMiller ![]() Orange Level Access ![]() Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29884 |
![]() ![]() ![]() ![]() ![]() |
As I looked around for my current buy HD7G I saw a lot of 11B FA units with the same appearance, were these residual HD11 late series tractors or did Allis rebadge them here and not there? Great looking easy to run units here.
|
|
![]() |
|
Steve allis dozer ![]() Silver Level Access ![]() Joined: 10 Apr 2011 Location: Australia Points: 232 |
![]() ![]() ![]() ![]() ![]() |
I think the only way to tell would be serial numbers, the late AC tractors had single top rollers in the brochures that i have they looked the same as the fiat allis series , the rippers are standen high lift swivel type fitted out here and the scrub canopy is made in queensland not a ROPS unit which in my opinion shouldn't have been allowed since the machine has the heavy ROPS mounts , instead they have mounted the canopy on the side steps which were not made to take this weight , It is a nice machine to operate ,very smooth ,plenty of power ,fast ,reliable with quick hydraulics and is good on fuel the only down side is some parts are getting hard to find
|
|
![]() |
|
SHAMELESS ![]() Orange Level ![]() ![]() Joined: 13 Sep 2009 Location: EAST NE Points: 29486 |
![]() ![]() ![]() ![]() ![]() |
I gits it after Tom!
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |