This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
New to me H3 |
Post Reply |
Author | |
dustinmo
Orange Level Access Joined: 12 Sep 2009 Location: Auxvasse, MO Points: 2185 |
Post Options
Thanks(0)
Posted: 20 Jan 2015 at 6:53pm |
Sorry but no pics as of yet, but I just got home (sunday) with my new to me H3 loader with backhoe, hadnt ran in a few years but yesterday (I thought it was locked up as we couldnt turn it by hand) I hooked a set of jumpers on it and low and behold she whirlled over, checked the points and cleaned rotor and cap and squirted a littled either in the carb and she fired, put some gas in it and replaced fuel line and she fired up , filled up the hyd tank and raised outriggers and boom and loader bucket, unchained it and backed it off the trailer, clickey clacked it around a little bit, I am Happy Happy Happy, I need to replace the manifold, rebuild the carb, probally clean fuel tank and pump, do a little sheetmetal work, probally a few hyd hoses and we will see what she'll do. we have 5 of theser little buggers now, I just really like them, got this one for 1840 dollars and have a little over 100 bucks in fuel and 2 trailer tires in it as of now but I dont think thats too bad
Edited by dustinmo - 23 Jan 2015 at 6:18pm |
|
Sponsored Links | |
Randaleky
Silver Level Joined: 17 Aug 2011 Location: belfry, ky. Points: 427 |
Post Options
Thanks(0)
|
SOUNDS OK TO ME
|
|
JohnCO
Orange Level Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
Post Options
Thanks(0)
|
Good Deal! Did the trailer come with it? Have fun.
|
|
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
|
dustinmo
Orange Level Access Joined: 12 Sep 2009 Location: Auxvasse, MO Points: 2185 |
Post Options
Thanks(0)
|
No that was the d15 I got the other day in indy (totally kidding)
|
|
darrel in ND
Orange Level Joined: 22 Nov 2009 Location: Hebron, ND Points: 8622 |
Post Options
Thanks(0)
|
I can see you were probably wearing a grin that would take plastic surgery to remove! Darrel
|
|
BradRisen
Orange Level Joined: 09 Feb 2012 Location: KY Points: 265 |
Post Options
Thanks(0)
|
We Need Pictures!!!!! I Want one!!!
|
|
dustinmo
Orange Level Access Joined: 12 Sep 2009 Location: Auxvasse, MO Points: 2185 |
Post Options
Thanks(0)
|
I put you a couple pic on here
|
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
That's a neat little machine. You did good. Be nice to have one.
|
|
sandman2234
Orange Level Joined: 21 Feb 2013 Location: Jax Points: 2547 |
Post Options
Thanks(0)
|
I could use one to get unstuck!! Good deal, nice, really nice!
David from jax |
|
A proud member of the Allis Express movement!
Northeast Florida |
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Dustin, just a question. You said you have 5 of them. Do you work all of them or stand back and admire them.
|
|
JohnCO
Orange Level Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
Post Options
Thanks(0)
|
I was wondering about the WD in the background that seems to be sinking into the ground. Isn't it a Diesel? Something wrong with it?
|
|
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
|
dustinmo
Orange Level Access Joined: 12 Sep 2009 Location: Auxvasse, MO Points: 2185 |
Post Options
Thanks(0)
|
one is torn down for complete rebuild, engine tranny rear as all hyds have already been done as well as clutches and brakes, when we started to use it NO 2nd or 3rd gear and she smoked like a trojan. its a 6way, another h3 hasnt been used in a couple years its a loader with 3pt, last time I tried I was digging a pond out and it just wanted to sink as was a little too heavy, so traded neighbor some backhoe time for some trackhoe time, I used my loader to move some stuff for him and I used a hoe he borrowed to dig my pond out. another has a shuttle issue, its a loader with a winch runs great just doesnt want to move all the time just havent has any time to fix and last is the little hd3 never even tried to start it was told it ran but just loaded it up and unloaded it at home, its a loader with rear weights, will probally get torn apart so I can put engine in a d15 and torque tube swapped with shuttle problem one, they are just too small to do any real work, just like looking at them. dad has a hd11 if we need to work and we have a d grader when we need to blade something, as well as a couple 615 backhoes if we need to dig, so I guess they are really just something to look at, I just really like ac stuff dont care what it is just as long as its allis
here is the little 6 way blade one when we had it torn apart for all 20 some hyd hoses, new clutches, steels, throwout bearings, seals in rear and brakes,
here is the one with shuttle issues
and here is the hd3
I dont think I have a pic of the one at my place
|
|
dustinmo
Orange Level Access Joined: 12 Sep 2009 Location: Auxvasse, MO Points: 2185 |
Post Options
Thanks(0)
|
|
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Like your pics. And I'm with you'ya can't beat an allis. My son-in-law has a D grader and I love to use it. Cleaned ditches out this fall till it got to wet. It's a gas & we talked about putting a diesel in it but the gas is in good shape so I think we'll leave it the way it is.
|
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Dustin if you're lookin for another H3 just saw one on St Louis craigslist. Said it was in Sullivan Mo. It's got quite the operators seat.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |