| Author |
 Topic Search  Topic Options
|
Lon(MN) 
Orange Level
Joined: 11 Sep 2009
Location: Merrill Wi
Points: 2043
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 5020 electric clutch
Posted: 16 Aug 2014 at 5:59am |
|
Working on a 5020 four wheel drive with a model 64 snowblower on the front. The electric clutch is bad. Where would I look to find another clutch?
|
 |
|
Sponsored Links
|
|
|
TedBuiskerN.IL.
Orange Level
Joined: 11 Sep 2009
Location: Davis, IL.
Points: 1959
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2014 at 8:09pm |
Good luck, got one from AGCO for about $800, lasted about an hour. Bought a used Land Pride rear mount for $650 instead.
Simplicity dealers may be able to get one too.
Edited by TedBuiskerN.IL. - 17 Aug 2014 at 8:10pm
|
|
Most problems can be solved with the proper application of high explosives.
|
|
Lon(MN)
Orange Level
Joined: 11 Sep 2009
Location: Merrill Wi
Points: 2043
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Aug 2014 at 8:38pm |
|
That is what I recommended.I wonder if an electric clutch from a larger lawn mower could be retrofitted?
Good to hear from you Ted.
|
|
john(MI)
Orange Level
Joined: 12 Sep 2009
Location: SE MI
Points: 9262
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2014 at 8:06am |
|
I had trouble with the wire they ran for the clutch on my 5020. It broke inside the insulation. I also remember having one of the fuses blow causing a problem with it. Did you hook a battery right to the wire at the clutch?
I was looking for one for a friend for his Case garden tractor and found many when I Googled it. You just need to know the specs.
Edited by john(MI) - 18 Aug 2014 at 8:08am
|
|
D14, D17, 5020, 612H, CASE 446
|
|
DSpears N IL
Silver Level Access
Joined: 11 Sep 2009
Location: Rockford,Ill
Points: 417
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2014 at 1:41pm |
Hi Lonn
Can you post a picture of the clutch? Possibly of it on the tractor. or can you tell me a better description of the problem with the clutch, like is it the coil field end, the middle rotor or the armature/ pulley end or a bearing on the coil/field end or the armature/pulley bearing end? Don't know for sure, but maybe we can help you! DeWayne Spears
Edited by DSpears N IL - 18 Aug 2014 at 1:47pm
|
|
daveingreenbay
Silver Level
Joined: 09 Oct 2009
Location: Green Bay
Points: 281
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Aug 2014 at 9:06pm |
|
Have a somewhat complete new front electric clutch for a 5015. No idea how compatible it would be for your application.
|
|
Lon(MN)
Orange Level
Joined: 11 Sep 2009
Location: Merrill Wi
Points: 2043
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Aug 2014 at 6:21pm |
|
My neighbor has the machine. He brought the clutch over for me to see. Says it was red hot. Not much of the coil or wires are left.
There are many electric clutches available but would have to get the specs of the original then retro fit a new one.
|
|
Dnoym N. S. Can.
Orange Level Access
Joined: 03 Oct 2009
Points: 544
|
Post Options
Thanks(0)
Quote Reply
Posted: 19 Aug 2014 at 7:36pm |
The Allis-Chalmers 5020 is the same as the Simplicity 9523 and similar to the Hinomoto E23 and Massey-Ferguson 210. http://www.jackssmallengines.com/Products/SIMPLICITY/Electric-PTO-Clutchesi have found that some ac pump off of a car/truck had the same clutch that you can change parts or machine to fit For proper ordering, reference Warner or Ogura part number stamped on clutch HTH B:-) Dnoym
|
|
gleasman1
Bronze Level
Joined: 07 Jun 2017
Location: PA
Points: 1
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jun 2017 at 12:42pm |
|
I have an AC 5015 that needs a new PTO clutch. Do you know what might work to replace this? I am new to this sort of forum...but really need this to work! I love my tractor...and don't want another mower.
|
|
