![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
615 backhoe hydraulic pump needed |
Post Reply ![]() |
Author | |
tonysac ![]() Bronze Level ![]() Joined: 26 Jan 2010 Points: 70 |
![]() ![]() ![]() ![]() ![]() Posted: 30 Apr 2012 at 6:07pm |
Hello ,I'm looking for a front pump that runs off the front pulley,mine is weak and I would like to replace it. I checked around and Minn Par wants $1200.00 and a hydraulic shop wants a little more. Does any body know of a more reasonable supplier please?Somebody must make a similar pump cheaper, it has hoses on it so port location isn't that critical.Thank You
|
|
![]() |
|
Sponsored Links | |
![]() |
|
Dave A ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Almond Wisconsi Points: 855 |
![]() ![]() ![]() ![]() ![]() |
what brand is it. Some of the pumps you still can get parts for.
|
|
Play the game for more than you can afford to lose... only then will you learn the game.
Winston Churchill |
|
![]() |
|
orangeman ![]() Orange Level ![]() Joined: 12 Sep 2009 Points: 1707 |
![]() ![]() ![]() ![]() ![]() |
Recommend you research the pump first by getting a pump service manual. Then check with a hydraulic speciality shop. Check around a major airport, usually plenty of hydraulic shops found around there. $1200 seems very high for a fifteen gallon per minute pump.
Good luck - Orangeman |
|
![]() |
|
DMiller ![]() Orange Level Access ![]() Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29910 |
![]() ![]() ![]() ![]() ![]() |
Steel prices are extreme, so are machine shop rates at least around here that to cover for any raises unforseen as to materials cost. I priced just some structural metal for a small project, thought the guy at the yard was nuts so went shopping, at $320/ton for scrap it is not hard to justify the prices for finished goods steel or aluminum.
|
|
![]() |
|
acer ![]() Bronze Level ![]() Joined: 10 Jun 2010 Points: 134 |
![]() ![]() ![]() ![]() ![]() |
look on the flange for pump id number. if you find it go to hydraulicpumpstore.com and get a quote. they matched my pump no for i-600 backhoe and sold me a new pump for $720.
it was exactly the same pump. hope this helps. also try hydraulic.net,LLC |
|
![]() |
|
tonysac ![]() Bronze Level ![]() Joined: 26 Jan 2010 Points: 70 |
![]() ![]() ![]() ![]() ![]() |
I did send it to a hydraulic shop and they also told me $1280.00. I believe its a webster pump and minn-par says no parts are available. It is a double pump ,one runs the loader and backhoe main circuit and the other runs the swing of boom.Where was the supplier of the pump for the I 600 located?
|
|
![]() |
|
Dave A ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Almond Wisconsi Points: 855 |
![]() ![]() ![]() ![]() ![]() |
Bought parts for my Webster from Hydraulic .net. Look for a old Minn Moline tractor or a Oliver combine Believe they us the same pump. |
|
Play the game for more than you can afford to lose... only then will you learn the game.
Winston Churchill |
|
![]() |
|
Calvin Schmidt ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Ontario Can. Points: 4515 |
![]() ![]() ![]() ![]() ![]() |
The early A-C hoes used a lot of Cessna hydraulics . My hydraulics guy took a look at the hydraulic pump on my 220 last week and commented that it looked like a Cessna. A-C used Webster small hyd pumps. My hydraulics guy also got me an exact match hydraulic pump for a JCB telahandler for under $500 when the dealer wanted over $1600.
|
|
Nothing is impossible if it is properly financed
|
|
![]() |
|
tonysac ![]() Bronze Level ![]() Joined: 26 Jan 2010 Points: 70 |
![]() ![]() ![]() ![]() ![]() |
Well,ordered a pump from hydraulicpumpstore.com and it fit perfect ,haven't tried it yet but was also the best price i could find,$720.00.so i can bring it back to life.now i got to adjust shuttle clutch,slips under load in forward.Thanks for all help!
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |