Short head and tall head are pretty much the same in flow, neither has any real advantage over the other.
Set up your drawbar for 18" at the lowest weight and highest air pressure you plan to run, make it easily adjustable to raise from there so if add weight or decrease tire pressure you can raise it to stay near your 18" mark. 20" from centerline of axle to the point of hook, most pulls require at 3" loop to pull from , 3/4" thick steel with an inch of steel around the opening. For your own safety, if you are not required to have wheelie bars, make your hook point beyond the rear tires .
Topic Options
Post Options
Thanks(0)
Gary in da UP wrote:
