| Author |
 Topic Search  Topic Options
|
DSeries4 
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7451
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Chrome exhaust pipe
Posted: 07 Dec 2011 at 10:08pm |
I am looking at getting a chrome exhaust pipe for my 190XT. I've seen several that get discolored at the bottom closer to the turbo elbow. What is the best kind to get so that this does not happen? Any advice would be appreciated!
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
 |
|
Sponsored Links
|
|
|
Protrucker
Orange Level
Joined: 25 Apr 2011
Location: Broome Cnty,NY
Points: 718
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Dec 2011 at 10:16pm |
|
I don't know if they make them for tractors, but double wall chrome pipes are used on motorcycles to prevent discoloring.
|
|
SenseiCrusher
Silver Level
Joined: 20 Sep 2011
Points: 124
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 1:26am |
|
Run a perforated feeder pipe inside the chrome one.
Edited by SenseiCrusher - 08 Dec 2011 at 1:28am
|
|
Jeff Z. NY
Orange Level
Joined: 11 Sep 2009
Points: 7326
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 3:46am |
Purple is good!!!
|
|
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4529
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 6:21am |
|
I run a 4" pipe inside the 5" chrome pipe on my D-21. No discolouring after cultivating 1000 acres. I have a real good system with no welding and everything below the hood for putting this together. I worked with my local heavy truck parts supplier.
|
|
Nothing is impossible if it is properly financed
|
|
AllisChalmers37
Orange Level
Joined: 11 Jul 2010
Location: London,KY
Points: 1846
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 6:24am |
 Protrucker wrote:
I don't know if they make them for tractors, but double wall chrome pipes are used on motorcycles to prevent discoloring. |
They actually do make the double-wall chrome ones for tractors. I looked at them for some of my tractors. I've got to leave for school and don't have time to look right now but if you guys haven't found them by this afternoon I will be glad to help.
|
|
1937 WC, 1950 CA, 1959 D14, 1967 190XT, 2006 Ram 3500
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4529
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 6:27am |
Edited by Calvin Schmidt - 08 Dec 2011 at 6:28am
|
|
Nothing is impossible if it is properly financed
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4529
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 6:31am |
|
|
|
Nothing is impossible if it is properly financed
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4529
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2011 at 6:36am |
|
I used a 3" to 4" adaptor off the turbo and installed a 4" pipe up to the curve of the chrome pipe. I then slid a 4" to 5" adaptor down the 4" pipe with the big end down. Next the 5" chrome fits on to the second adaptor. You will likely want to go 3" to 4" on a one ninety so you can eliminate the first step. Both tractors above have this setup but only the one with the curved pipe is mine.
|
|
Nothing is impossible if it is properly financed
|
|
Toscani NE SD
Orange Level
Joined: 21 Jan 2011
Location: Milbank S.D.
Points: 369
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Dec 2011 at 6:18am |
|
the best one is from Thomure in East Prairie Mo,800-527-9954 ask for Dave,these have the best looking bend if u want the curve,so many have such a ugly curve,if u don't have one from this place u don't have the "good one"
|
|
