| Author |
 Topic Search  Topic Options
|
keith ashley 
Bronze Level
Joined: 08 Nov 2011
Points: 12
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: hydrolic pump alice B
Posted: 25 Nov 2011 at 5:21pm |
|
Hi Guys have done a pressure test on the allice b pump it pushing a 1000 psi just over, even when engine on full rev it never fluctuates i thought we had solved the problem ?? am right in assuming it should be 3000 psi is that right? if so am asking for advice again? plus can any one tell me were this number is from or what it stands for as this is the engine no R10644k keith.
|
 |
|
Sponsored Links
|
|
|
powertech84
Silver Level
Joined: 17 Oct 2009
Location: Wisconsin
Points: 470
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Nov 2011 at 5:26pm |
|
At least you spelled pump right...
|
|
JimD
Orange Level
Joined: 11 Sep 2009
Location: Mounds, OK
Points: 2116
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Nov 2011 at 5:26pm |
|
Yep, you have a problem. Should see at least 2500, and 3000 (might be 3200) is spec.
|
Owner of OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543
|
|
JimD
Orange Level
Joined: 11 Sep 2009
Location: Mounds, OK
Points: 2116
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Nov 2011 at 6:44pm |
|
Hey powertech, before you embarass yourself, not all Allis tractors are in the US.
|
Owner of OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543
|
|
powertech84
Silver Level
Joined: 17 Oct 2009
Location: Wisconsin
Points: 470
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Nov 2011 at 6:58pm |
|
Thanks jim, feel better now?
|
|
MNLonnie
Orange Level
Joined: 11 Sep 2009
Location: Baxter MN
Points: 4791
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Nov 2011 at 7:06pm |
|
As far as your serial # the R prefix was used on RC tractors and power unit motors and the K is for Kerosene.
|
|
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
|
wfmurray
Orange Level
Joined: 13 Sep 2009
Location: Bostic NC
Points: 1225
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Nov 2011 at 7:17pm |
|
To get more pressure take plug out of top of pump and loosen set screw on side then punch sleeve down on relieve spring . Just a little does a lot.
|
|
