| Author |
 Topic Search  Topic Options
|
Josh Day 
Orange Level
Joined: 29 Nov 2010
Location: Indiana
Points: 3427
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: CA Clutch
Posted: 16 Oct 2011 at 9:38pm |
|
I have a 1952 CA SER #21868, that the foot clutch gave out on me.I was looking for prices on ytmag and they have two different size of clutchs, one is a 8.5in and the other is a 9in, both are marked for B,C,and CA. Sandy Lake is the same way with the size and both are marked for B,C,andCA. Is there a SER# break that they put different size of clutchs in the CA? I need to know so I can order one, and put her back together again. Thanks Josh
Edited by Josh Day - 16 Oct 2011 at 9:39pm
|
 |
|
Sponsored Links
|
|
|
Boogerowen
Orange Level
Joined: 23 Apr 2011
Location: Mannford Ok
Points: 431
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2011 at 9:43pm |
|
If it were me, I would call them in person and give them your serial number and they will send you the correct parts.....
|
|
Josh Day
Orange Level
Joined: 29 Nov 2010
Location: Indiana
Points: 3427
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2011 at 9:47pm |
|
I did with Sandy lake and they asked me what size I had. I just started to tear it a part so I can't measure it yet.
Edited by Josh Day - 16 Oct 2011 at 9:49pm
|
|
Chalmersbob
Orange Level
Joined: 11 Sep 2009
Location: Pennsylvania
Points: 2122
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2011 at 10:45pm |
The CA used the 8.5" clutch as did the B & C with electric start. The 9" clutch was used on crank start models. There wasn't enough space to add a ring gear so the went to a 8.5" clutch.
The D14 and D15 use a 9" clutch. Bob
|
|
Josh Day
Orange Level
Joined: 29 Nov 2010
Location: Indiana
Points: 3427
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Oct 2011 at 6:05am |
|
All right thats what I needed to know. Thanks
Edited by Josh Day - 17 Oct 2011 at 6:05am
|
|
Rfdeere
Orange Level
Joined: 11 Sep 2009
Location: Idaville, IN
Points: 3283
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Oct 2011 at 1:16pm |
 Chalmersbob wrote:
The CA used the 8.5" clutch as did the B & C with electric start. The 9" clutch was used on crank start models. There wasn't enough space to add a ring gear so the went to a 8.5" clutch.
The D14 and D15 use a 9" clutch. Bob |
I find it odd that Sandy Lake does not know this ? They are usually very knowledegable.
|
|
|
|
Josh Day
Orange Level
Joined: 29 Nov 2010
Location: Indiana
Points: 3427
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Oct 2011 at 7:57pm |
|
I know, Brenda asked me what size I had and Bill thought it had the 9in clutch. I'm glad I got a second opinion.
|
|
Chalmersbob
Orange Level
Joined: 11 Sep 2009
Location: Pennsylvania
Points: 2122
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Oct 2011 at 10:14pm |
Actually some of the crank start B models used an 8.5" clutch.
I've had 8 B's 3 C's and 4 CA's, 1951 and 1952 , apart and this is what I found on every one of them. Some of them had a solid disk and some had springs in them.
Bob
|
|
Chalmersbob
Orange Level
Joined: 11 Sep 2009
Location: Pennsylvania
Points: 2122
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 Oct 2011 at 10:15pm |
Actually some of the crank start B models used an 8.5" clutch.
I've had 8 B's 3 C's and 4 CA's, 1951 and 1952 , apart and this is what I found on every one of them. Some of them had a solid disk and some had springs in them.
Bob
|
|
