This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
The Forum Parts and Services Unofficial Allis Store Tractor Shows Serial Numbers History
Forum Home Forum Home > Allis Chalmers > Farm Equipment
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


1938 allis b
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
rtomlinson View Drop Down
Bronze Level
Bronze Level


Joined: 10 Feb 2026
Location: madison
Points: 7 		Post Options Post Options   Thanks (0) Thanks(0)   Quote rtomlinson Quote  Post ReplyReply Direct Link To This Post Topic: 1938 allis b
    Posted: 2 hours 30 minutes ago at 5:24pm
How do U remove throw out bearing cover
On PTO I can not locate fill & drain plug to put a new cup of oil in.
For air cleaner should U just submerged the entire canister

Thanks
Back to Top
Sponsored Links


Back to Top
steve(ill) View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: illinois
Points: 90777 		Post Options Post Options   Thanks (0) Thanks(0)   Quote steve(ill) Quote  Post ReplyReply Direct Link To This Post Posted: 1 hour 56 minutes ago at 5:58pm
the tin cover under the clutch just prys off.. Couple small fingers WEDGE it in...

the transmission, differential and PTO are one big housing.. 3 drain plugs on the bottom, but only ONE FILL PLUG... like a 1 inch pipe plug by your left foot on the side of the transmission..fill to the bottom thread... about 7-8 quarts of UTF or 20wt oil.. ... if you dont have hydraulics, its POSSIBLE that the housing has GEAR LUBE in it.. If your changing the oil, it would be better to have a lighter weight oil to get up to the upper shaft bearings..

air cleaner cup should be about half full... there should be a couple marks on the cup.. or there is a center  stand tube welded into the cup.. fill it up to the two SLOSH holes... that keeps the oil from sloshing around when you go up and down a hill.


Edited by steve(ill) - 1 hour 54 minutes ago at 6:00pm
Like them all, but love the "B"s.
Back to Top
steve(ill) View Drop Down
Orange Level Access
Orange Level Access
Avatar

Joined: 11 Sep 2009
Location: illinois
Points: 90777 		Post Options Post Options   Thanks (0) Thanks(0)   Quote steve(ill) Quote  Post ReplyReply Direct Link To This Post Posted: 1 hour 51 minutes ago at 6:03pm
https://www.youtube.com/watch?v=M0tD-eRXlhk
Like them all, but love the "B"s.
Back to Top
rtomlinson View Drop Down
Bronze Level
Bronze Level


Joined: 10 Feb 2026
Location: madison
Points: 7 		Post Options Post Options   Thanks (0) Thanks(0)   Quote rtomlinson Quote  Post ReplyReply Direct Link To This Post Posted: 0 hours 60 minutes ago at 6:54pm
Thanks,
I get the 3 drain plugs, when I drain the tran. Got lots of water when diff. Drain more oil & water, PTO got nothing I stuck scredriver I PTO hole just got brown gunk on long scredriver.
I empty the port tran.first
I will fill with D.F
& Let sit maybe drive 10 min.
But some where I read U should drain the pto on the housing somewhere. If I had that much water in tran etc. I thought I should find & drain U only add a cup of oil if U find it.
Thanks
Back to Top
rtomlinson View Drop Down
Bronze Level
Bronze Level


Joined: 10 Feb 2026
Location: madison
Points: 7 		Post Options Post Options   Thanks (0) Thanks(0)   Quote rtomlinson Quote  Post ReplyReply Direct Link To This Post Posted: 58 minutes ago at 6:56pm
I do have hyd & pulluy
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.227 seconds.


Help Support the
Unofficial Allis Forum