Allis C engine rebuild

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   This is my first post. I have an Allis C with original steel pistons. My bore gauge is showing .003”- .006” over 3.375”. The two inside bores have slight pitting. This tractor will be used for mowing with any luck for the next 20 years. 
Are all rebuild piston sleeve kits the same in quality? Second question.  The valve seats need ground. What is the acceptable tolerance for valve guides. My AC book lacks wear specs. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
3rd generation Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 6 hours 21 minutes ago Location: Iowa Points: 2	Post Options Post Reply Quote 3rd generation Report Post Thanks(0) Quote Reply Topic: Allis C engine rebuild Posted: 6 hours 4 minutes ago at 8:15am
	This is my first post. I have an Allis C with original steel pistons. My bore gauge is showing .003”- .006” over 3.375”. The two inside bores have slight pitting. This tractor will be used for mowing with any luck for the next 20 years. Are all rebuild piston sleeve kits the same in quality? Second question. The valve seats need ground. What is the acceptable tolerance for valve guides. My AC book lacks wear specs.

Sponsored Links