| Author |
 Topic Search  Topic Options
|
Travis2766 
Silver Level
Joined: 26 Aug 2015
Location: Amherst, Wi
Points: 431
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D15 Tires
Posted: Yesterday at 10:44am |
|
I have 14.9-26 tires on my D15 that are defiantly on barrowed time! Neighbor has a used set of 16.9-26 radials with some tread left off his 4wd that he'd give to me. The current rims are 12" or 13" width and I have no fluid in the tires. I realized the tires may bulge some due to the narrow rims, which I'm fine with. I'm hoping lowering the air pressure can help this issue some. I don't use the D15 for heavy work just pulling the sickle and hay rake. The info I've found online says this can be done but I've found little to no info about doing it with radial tires. Thoughts????
Edited by Travis2766 - Yesterday at 10:45am
|
|
190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment.
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21685
|
Post Options
Thanks(0)
Quote Reply
Posted: Yesterday at 3:06pm |
|
Go for it. You can try and run lower air pressure (like 8 to 10 lbs) to make them wear more evenly, but they're used tires, so the wear isn't that big of deal.
|
|
WF owner
Orange Level
Joined: 12 May 2013
Location: Bombay NY
Points: 4972
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 hours 11 minutes ago at 7:08pm |
|
I bought a pair of 24" tires off the front of a 4wd tractor that I mounted on one of my D-10's. They ride terribly rough. Tread was worn unevenly.
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4532
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 hours 9 minutes ago at 8:10pm |
|
I'm told that tires built for the front of a MFD tractor are built different then the same size tire intended for the rear of a smaller tractor. Likely why they are rough. 16.9 radials on a D-15 could be as low a 6 psi if they are tubeless
|
|
Nothing is impossible if it is properly financed
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21685
|
Post Options
Thanks(0)
Quote Reply
Posted: 17 hours 45 minutes ago at 10:34pm |
|
FWA tires are likely 10 or 12 ply sidewalls.
|
|
coggonobrien
Orange Level Access
Joined: 14 Nov 2010
Location: Eastern Iowa
Points: 1853
|
Post Options
Thanks(0)
Quote Reply
Posted: 4 hours 24 minutes ago at 11:55am |
|
unfortunately I think I ended up with the last pair of 16.9x26 firestone rear tires in the country. They do look better on a d15 then a 14.9
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21685
|
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 26 minutes ago at 12:53pm |
|
One thing for sure with 16.9 x 26's on a D-15, it makes the drawbar higher, the PTO higher and the lift arms/snap coupler bell higher. On some implements, that doesn't seem to make much difference, but to other implements it does.
|
|
