220 fender head lights

If you have a light with the triangle in the middle of the lense and has a G in the middle of the triangle, that is a GUIDE light... A-C used the Guide light assemblies in the productions of their tractors.

Below are a set of lights on a 170

 

First light is a 4410 back-up light produced by Guide, lots of fluting in the glass.Was also used as a rear work light.

Second light is a GE H7610 halogen 50 watt. If you use these lights, I suggest to either put them on a seperate toggle switch or control them thru relays from the light switch. I smoked a good light switch because I had 3 Halogens on the switch. I put in a toggle switch for them and that has worked very good for me.

Third light looks original to the tractor, It is a Guide 4411 35 watt 'utility'. Dealer parts book calls it 'Road headlight',  part number 230232  .

Forth light surprised me when taking the light out, It turned out to be a GE 35 watt rear tail light/ red light #4409 4tractor6.  Parts book labels the sealed beam as #235583

  As for the field/work light, think the number on that was 4406.  Allis had a part number of 239804 for the sealed beam field light.

  I would put the larger fluted lights in instead of the multiples, just seamed brighter to me.

 Years ago I use to have a list of manufactures and number to identify what light would cross over but can't find that list anymore.