210 update

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Thought I would update the 210 project that I put a 3700 engine in.
Remeber I only have 3 days a week to work on this project since I work monday through thursday 12 hour shifts and try to do everything else in life.
I got the motor on last Septmeber or maybe it was October,don't remember for sure.
Had to take it to scheid diesel to get fuel lines made since I used my DC pump since it was already turned up to the max instead of the DM electric pump,that was the first of April.I did have it out of time 180 degrees and the first time it started and ran was June 26th.

Then noticed it had a oil trail at back of motor,so instead of taking it apart myself I took it to a dealer and they fixed it in like 2 days,yay.

I did have an injector return line leak and a leak on left side of fuel tank and those fixed now.

Got the fenders off now with primer on them and also got all the wheel clamps cleaned and painted this weekend.
Want to get fenders painted and ready to go on before changing the pressed steel wheels with open center wheels with the cast center wheels back on.

And yes I'm doing this by myself with little or no help most the time.

I don't know how to post pictures on here but wish I did.

Sorry so long.

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Kevin210 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 08 Oct 2018 Location: Indiana Points: 377	Post Options Post Reply Quote Kevin210 Report Post Thanks(0) Quote Reply Topic: 210 update Posted: 02 Oct 2022 at 7:45pm
	Thought I would update the 210 project that I put a 3700 engine in. Remeber I only have 3 days a week to work on this project since I work monday through thursday 12 hour shifts and try to do everything else in life. I got the motor on last Septmeber or maybe it was October,don't remember for sure. Had to take it to scheid diesel to get fuel lines made since I used my DC pump since it was already turned up to the max instead of the DM electric pump,that was the first of April.I did have it out of time 180 degrees and the first time it started and ran was June 26th. Then noticed it had a oil trail at back of motor,so instead of taking it apart myself I took it to a dealer and they fixed it in like 2 days,yay. I did have an injector return line leak and a leak on left side of fuel tank and those fixed now. Got the fenders off now with primer on them and also got all the wheel clamps cleaned and painted this weekend. Want to get fenders painted and ready to go on before changing the pressed steel wheels with open center wheels with the cast center wheels back on. And yes I'm doing this by myself with little or no help most the time. I don't know how to post pictures on here but wish I did. Sorry so long.

Sponsored Links

Pete from IL Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 29 Dec 2009 Location: Beecher IL. Points: 311	Post Options Post Reply Quote Pete from IL Report Post Thanks(0) Quote Reply Posted: 02 Oct 2022 at 8:38pm
	Thanks for the update. I don't know how to post pictures either but would like to see some.