| Author |
 Topic Search  Topic Options
|
captaindana 
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 7 grand
Posted: 09 Oct 2021 at 9:54am |
|
OK guys I got a new to me Allis 7000 a1976 model which apparently needs a lot of work to get up to my standards. First question is I have two leaky injectors number one and number two; I’ve ordered new copper sleeves and O rings for those two injectors. Can you tell me what kind of a tool I need to replace the copper sleeves with and where I can find such a tool? As always thanks to all! Dana
|
|
Blue Skies and Tail Winds
Dana
|
 |
|
Sponsored Links
|
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8367
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 10:23am |
|
Would think Agco should have something - Have heard a Cummins tool is close to redo the copper sleeves- or a Cummins shop can fix them
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24735
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 10:39am |
hmm, should you also replace the other injector parts, while you're at it ?? My luck, fix 1+2 then 3 and 6 would leak....
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Lynn Marshall
Orange Level Access
Joined: 13 Sep 2009
Location: Dana, Iowa
Points: 2415
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 12:29pm |
|
You have to remove the cylinder head to do that. It's expensive and involved. Wouldn't be surprised if the head is cracked too.
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1492
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 12:56pm |
|
I am not very good with the search system but in the past I have posted the tool spec sheet to install the sleeves. If you can't find it, I can get them to you. Sent spec sheet to those that wanted to have a set made but have never heard if it worked out. Dale
Edited by orangereborn - 09 Oct 2021 at 12:59pm
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3571
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 1:36pm |
“7 grand”. Is that your nickname for your new AC 7000? I still like “Mater” cause of it’s tow truck mirrors. Cars movie, Mater’s quote, “Ain’t no need to watch where I’m going,,, just need to know where I’ve been...” Congratulations! Hoping your 2900’s head isn’t cracked. Regardless, I know you’ll have it purring to your satisfaction soon. Just for fun... https://m.youtube.com/watch?v=HA6xXNToFas
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 3:40pm |
|
Ok how do I know if my heads cracked? Bicent Bandit is what the new decals say to go along with big sisters “Bandit “ and “Bandit II”
|
|
Blue Skies and Tail Winds
Dana
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 3:44pm |
|
Lol AC7060IL
|
|
Blue Skies and Tail Winds
Dana
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 3:47pm |
|
Next up are 7000 brakes same type as 200’s? I only got one🤷🏻♂️
|
|
Blue Skies and Tail Winds
Dana
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 22059
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 4:37pm |
|
Let's just slow down here, Bunky. You say injectors are leaking. Leaking what ??? If you're leaking COOLANT, you have a cylinder head issue and the head has to be removed to replace injectors copper tubes, OR the head is cracked, still have to remove the head. Most of the time when someone says they have "injectors leaking" it is simply a valve cover gasket !!!!!
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 6:23pm |
|
Thanks Doc. Soon as I get home I will surely examine more closely as I should have done last night!
|
|
Blue Skies and Tail Winds
Dana
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 6:51pm |
|
Just out of curiosity, Is this a cabbed machine? Does it have decent rubber and duals in the rear ?
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 7:00pm |
|
Yup the one from Kokomo with an aux 3ph fuel tank full front weights duals tinted windows
|
|
Blue Skies and Tail Winds
Dana
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 7:07pm |
 captaindana wrote:
Yup the one from Kokomo with an aux 3ph fuel tank full front weights duals tinted windows |
Can you post a pic ?? If you were replying to me, I have no clue as to your machine, other than it "might" have come from Plevna ??
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 9:03pm |
|
If injectors are leaking at copper seat, they will be clean and dust seal may be gone. If injector is leaking where tip cap screws on or valve cover leaking, it will be oily. MACK
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2021 at 7:33pm |
|
In between flying more than full time…and building another 20x60 addition…are 7000 brakes like XT3 and 200 or? Thanks. Dana
|
|
Blue Skies and Tail Winds
Dana
|
|
darrel in ND
Orange Level
Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8726
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2021 at 9:58pm |
|
Believe Dr Allis when he tells you to check the valve cover for leakage!
Sure glad I listened to him on that subject. A friend of mine who had the same issue, wouldn't listen to me, and pulled the injector.
Afterwards, he tightened the valve cover bolts slightly, and ate some crow
Darrel
|
|
Alex09(WI)
Orange Level
Joined: 15 Mar 2012
Location: CECIL WI
Points: 1754
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2021 at 12:06am |
captaindana wrote:
In between flying more than full time…and building another 20x60 addition…are 7000 brakes like XT3 and 200 or? Thanks. Dana |
7000 brakes are disk brakes like late 200
|
|
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 966
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2021 at 12:10am |
Dana, as Dr says. Check for what leaks, oil is likely from Valve Cover Gskt, bolts work loose and leak, can tighten them 1 or 2 times then needs gskt. If that's your leak there's a update for the cover bolts it's part #74036974 it was started in early '82. The Valve Cover Gskt is #74008074. I've done 5 - 6 on 100 series over 20 yrs, so far no leaks. IF it's diesel fuel leaking check the return line fittings for leak before pulling injectors. I use a couple cans of brake cleaner to help dry up area leaking, then run a few hours.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2021 at 5:28am |
|
Oh believe me y’all I listen to our Doc! And Mack! And y’all! I’m too busy like I said flying and building ano5er tractor storage building BUT we lifted the side cover off of Bicentennial. Bandit and sure enough it looks and smells like OIL! But my concern is still…she just didn’t sound right…. So we shall see when the time comes I will dive into this project. Thanks so much to all. Dana
|
|
Blue Skies and Tail Winds
Dana
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2021 at 5:32am |
|
Previous owner said the injection pump had not over 70 hours on a rebuild. When my rebuilt pumps return they look like new. This one on the Bicentennial Bandit doesn’t look like that so IDK maybe a garage Fix or nothing? Thanks Dana
|
|
Blue Skies and Tail Winds
Dana
|
|
Mikez
Orange Level Access
Joined: 16 Jan 2013
Location: Usa
Points: 8735
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2021 at 7:37am |
are we going to see a picture of the new tractor. Where abouts are you putting the new shed.
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2021 at 5:21pm |
|
|
|
captaindana
Orange Level
Joined: 14 Sep 2009
Location: Fort Plain, NY
Points: 2573
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Oct 2021 at 5:25pm |
|
Mikez I’m adding westward When the weather turns cold her and things calm down a bit you’ll have to come up with your dad
|
|
Blue Skies and Tail Winds
Dana
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3571
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Oct 2021 at 10:09am |
|
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3571
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Oct 2021 at 10:32am |
|
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12233
|
Post Options
Thanks(0)
Quote Reply
Posted: 18 Oct 2021 at 11:05am |
Does that bother you for some reason? Or is it just confusing?
|
|
FREEDGUY
Orange Level Access
Joined: 15 Apr 2017
Location: South West Mich
Points: 5396
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Oct 2021 at 7:14pm |
Tbone95 wrote:
Does that bother you for some reason? Or is it just confusing? |
My comment on "another barn" was aimed at his "growing" wealth of OLD ORANGE  !! Kudos to the Captain for using/ sheltering these works of art IMO 
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3571
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Nov 2021 at 3:17pm |
|
|
|
DanWi
Orange Level Access
Joined: 18 Sep 2009
Location: wttn
Points: 1939
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Nov 2021 at 9:49pm |
|
Looks good. Did you get your leaks stopped? what were they?
|
|
