| Author |
 Topic Search  Topic Options
|
NCAllisnut 
Silver Level
Joined: 11 Sep 2009
Location: Shelby NC
Points: 365
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D15 Rear rim question
Posted: 13 Mar 2021 at 5:41pm |
Hey folks, been a while -
I'm looking at a D15 series II that appears to be in good shape, but the rear rims and tires are rotten.
Will 28" rims and centers from a WD work on a D15?
Thanks -
|
|
www.facebook.com/AdamDavisWoodworking
|
 |
|
Sponsored Links
|
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24399
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2021 at 5:55pm |
A 'stock' D15 probably(?) has 26" rims, same as a D-14. If so , combine rims will fit. bolt pattern is 8 x 8"bolt circle.
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
NCAllisnut
Silver Level
Joined: 11 Sep 2009
Location: Shelby NC
Points: 365
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2021 at 6:38pm |
You're correct, the D15 has 26" spin out rims that are rotten beyond repair. My question is whether or not 28" centers and rims will fit - they are 8 lugs on an 8" circle, with a 6" center hole. I can get a set of WD rims & tires that are in decent shape for a reasonable price, just trying to make sure they will work before I buy a bunch of stuff that won't work.
|
|
www.facebook.com/AdamDavisWoodworking
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24399
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2021 at 7:08pm |
They'll fit but maybe(?) won't clear the fenders depending on the width ? I've got 14.9x26 on one of my D14s ,and they're much taller then the original 12-26(13.2-16) tires. I'm sure someone must have put 28s on before....I got lucky ,got some good rubber on combine rims 15 years ago after a ,sniff,sniff...combine demo derby...
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
Burl
Silver Level Access
Joined: 13 Sep 2014
Location: Aurora Mo.
Points: 232
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2021 at 7:37pm |
|
I just helped a friend put (WD-28 in.) on his D 14 . They fit & look pretty good ! Answer is yes.
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7447
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2021 at 8:46pm |
|
If your rims are only rotten around the valve stems and the other 95% is good, you can get them patched up. That's what I usually do.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Kenny L.
Orange Level Access
Joined: 12 Sep 2009
Location: NEIOWA
Points: 1332
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2021 at 11:01am |
Here is a picture of my D-15 with 13.6x28 tires and 12x28 rims and centers from a WD 
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 948
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2021 at 2:15pm |
|
Yes, My D15 I, has had 13.6x28" on it for 30+ years. They came off donor WD45. Be warned, it really increases speed over the stock tire size, whatever that was.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
Ron Eggen
Orange Level
Joined: 15 Sep 2009
Location: Lohman, Missour
Points: 547
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2021 at 2:44pm |
|
In my opinion Allis should have kept the 28" wheels from the WD when they came out with the D-14 & 15 , they already had the wheels , why go and change the size 2 inches smaller and harder to find.
|
|
john(MI)
Orange Level
Joined: 12 Sep 2009
Location: SE MI
Points: 9262
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2021 at 3:38pm |
This is my D14 when I had 28's on it.
|
|
D14, D17, 5020, 612H, CASE 446
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 3989
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2021 at 6:36pm |
28's will obviously fit, as the pictures show. Only downside is you might not be able to spin them all the way in.
The tallest tires I've ever had on a WD or 45 were 26's. 15X26 or 18.4X26 in modern terms. yes, they are taller than my 16'9X28's! Still have them sitting in the shed, good rubber but fixed rims. If you could bolt some weights to them I'd put them on something.
|
|
NCAllisnut
Silver Level
Joined: 11 Sep 2009
Location: Shelby NC
Points: 365
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Mar 2021 at 12:12pm |
Well, we have a new-to-us D15. It currently has 28" centers and rims on it. The rims are more than just rust out at the valve stem, there is an 18" section of each rim that is just gone. It must have set in a puddle of calcium chloride for years.
Engine runs well, power director and hydraulics seem to work well. The PTO seal is gone, and the hydraulic and transmission oil levels are very low. This will be fun to work on - we don't plant to do a full strip and paint restore, just put it back like its supposed to be and enjoy it.
Edited by NCAllisnut - 15 Mar 2021 at 12:15pm
|
|
www.facebook.com/AdamDavisWoodworking
|
|
IBWD MIke
Orange Level
Joined: 08 Apr 2012
Location: Newton Ia.
Points: 3989
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Mar 2021 at 2:13pm |
|
Hey, I recognize that 240!
|
|
NCAllisnut
Silver Level
Joined: 11 Sep 2009
Location: Shelby NC
Points: 365
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Mar 2021 at 10:40am |
Some progress...
And the tires to go on it came home yesterday...
|
|
www.facebook.com/AdamDavisWoodworking
|
|
