timing gears Allis-Chalmers 20-35

I'm new here so a short introduction: I live in the Netherlands and we currently have two Allis-Chalmers tractors: a '39 orchard model B and a '29 model 20-35. In the past we had two FD3's (both low and high steer model), a WD, a CA, and a G. 

At the moment I'm busy with the 20-35. A lot of repairs have to be done to the engine: valves and guides, crankshaft, all bearings, and 3 of the 4 cylinder liners are grooved or pitted by rust. With a lot of work and improvisation I can fix these things.

However there are some timing gears I need to replace because of broken teeth!

The crankshaft gear and the camshaft gear are the only ones that are undamaged. The three other gears (two intermediate gears and the water pump / magneto gear) are damaged beyond repair. 

The gears are helical cut gears, not straight cut like the older (pre '29) ones.

Is here a forum member who perhaps has these gears and want to sell?

The water pump / magneto gear: 26 teeth

Small intermediate gear: 38 teeth

Large intermediate gear: 56 teeth

Thanks! Sjors 

To my knowledge there are no new gears available, so you will have to find good used ones.

PFOUTS FAMILY FARM LLC. Parts for many Allis-Chalmers Models Specializing in models A, E, K, U, UC, M and Continental Mark and Rosie Pfouts 13040 State Route 700 Hiram, OH 44234 1.440.570.3653 PFOUTSFAMILYFARM@GMAIL.COM

Matt Scott would be another worth asking

Glad to hear about another 20-35 being fixed up, one of my favorites.  I have several.  I you have more questions feel free to ask, I may be able to help.  Keep us updated on your progress!