| Author |
 Topic Search  Topic Options
|
jerbob 
Orange Level
Joined: 07 Aug 2017
Location: Michigan
Points: 961
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Exhaust stack for HD16
Posted: 10 Dec 2018 at 3:49pm |
|
Bought a strait pipe for my 16 and thought I had the right size. Nope, too big. The stacks I find most everywhere are in even numbers. 3", 4" 5" and so on.
Can someone steer me to the right place where you found a good either straight pipe or turnout pipe that will fit.
The original muffler has a 4.75" OD for the stack to slide on. I found a few on a site I use for my Oliver tractor called Ag Pars Fast. I have one of theirs now and its pretty cheap and thin.
Thank you
|
|
HD16DC, Bobcat 863 Turbo, Oliver 1855, John Deere 855,
|
 |
|
Sponsored Links
|
|
|
Eric B
Orange Level
Joined: 09 Feb 2012
Location: British Columbi
Points: 930
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Dec 2018 at 9:08pm |
|
So what if you make a wrap around sleeve out 3/32" material and slip in between for using a 5'' stack? Maybe if you cut a couple of pieces of 5" pipe... cut strips out for resizing and use up the 1/4'' space of difference. I hope I'm making myself understood. I assume you're using a heavy duty clamp or two for 5" exhaust to wrap around to make it really tight...
|
|
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 30971
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 5:38am |
|
Doesn't your tractor have the Farr square multi hole air cleaner? If it did it will be as my HD7G where these had an 'Aspirator' which will have to be custom built IF you should want to add one. That unit sucked the collected dust off the air cleaner pre-cleaner section up the stack.
Again if it had one of these an adaptor to use a standard five inch would be appropriate.
|
|
jerbob
Orange Level
Joined: 07 Aug 2017
Location: Michigan
Points: 961
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 6:56am |
 Eric B wrote:
[COLOR=#ff6600" size="4]<span style="line-height: 27px;]So what if you make a wrap around sleeve out 3/32" material and slip in between for using a 5'' stack? Maybe if you cut a couple of pieces of 5" pipe... cut strips out for resizing and use up the 1/4'' space of difference. I hope I'm making myself understood. I assume you're using a heavy duty clamp or two for 5" exhaust to wrap around to make it really tight...</span>[/COLOR] |
Good idea Eric. I used exhaust wrap that you can wrap headers with as a gasket. Worked great however would not snug up enough with the pipe clamps and allowed stack to slide up and down. Metal wedges as you mention might be the way to go. Thank you.
|
|
HD16DC, Bobcat 863 Turbo, Oliver 1855, John Deere 855,
|
|
jerbob
Orange Level
Joined: 07 Aug 2017
Location: Michigan
Points: 961
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 6:59am |
DMiller wrote:
Doesn't your tractor have the Farr square multi hole air cleaner? If it did it will be as my HD7G where these had an 'Aspirator' which will have to be custom built IF you should want to add one. That unit sucked the collected dust off the air cleaner pre-cleaner section up the stack.
Again if it had one of these an adaptor to use a standard five inch would be appropriate. |
Hello DMiller. My tractor goes it have that style. It has the Donoldson round 2 stage air filter with a straight air intake stack with clear dust bowl on top.
|
|
HD16DC, Bobcat 863 Turbo, Oliver 1855, John Deere 855,
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 30971
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 7:16am |
|
Vey good, just checking. Another alternative would then be to fab a adaptor to the muffler.
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3786
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 7:50am |
|
on mine the chrome stack was slightly larger than the muffler exit also. you could make a bushing from exhaust piping. on mine i cut vertical slits at the bottom of the chrome stack just a couple inches worth. i used a pipe clamp and the slits give enough to allow the stack to tighten up but will allow it to slip of if a big limb gets under the riser and hits it as to not cause any damage.
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
jerbob
Orange Level
Joined: 07 Aug 2017
Location: Michigan
Points: 961
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 8:48am |
DMiller wrote:
Vey good, just checking. Another alternative would then be to fab a adaptor to the muffler. |
Agree DMiller. thank you for the suggestion. Its the small things like this that bug me. thank you again.
|
|
HD16DC, Bobcat 863 Turbo, Oliver 1855, John Deere 855,
|
|
jerbob
Orange Level
Joined: 07 Aug 2017
Location: Michigan
Points: 961
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Dec 2018 at 8:51am |
CAL(KS) wrote:
on mine the chrome stack was slightly larger than the muffler exit also. you could make a bushing from exhaust piping. on mine i cut vertical slits at the bottom of the chrome stack just a couple inches worth. i used a pipe clamp and the slits give enough to allow the stack to tighten up but will allow it to slip of if a big limb gets under the riser and hits it as to not cause any damage. |
Thank you Cal. I will try that. I can cut off a section of the pipe and use as a bushing.
|
|
HD16DC, Bobcat 863 Turbo, Oliver 1855, John Deere 855,
|
|
