| Author |
 Topic Search  Topic Options
|
BLOVE 
Bronze Level
Joined: 28 Dec 2017
Location: Sc
Points: 4
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: HD5 STEERING CLUTCH HELP
Posted: 13 Mar 2018 at 3:26pm |
Working on HD5 that has been sitting for over 20 years. Got all the major problems fixed and now on to the steering clutches. I removed the left side steering clutch and noticed that the studs between the plate and hub were broken. I have not been able to find these and was wondering if anyone could help me or may be able to point me in the right direction of where I may be find them. Thanks
|
 |
|
Sponsored Links
|
|
|
Dozer
Orange Level
Joined: 16 Aug 2011
Location: SW New York
Points: 689
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Mar 2018 at 5:59pm |
|
Are you referring to the 1/2" bolts that hold the clutch assembly together? The parts book says not to replace them with standard bolts. You are supposed to mark the assembly and reassemble it the same way. The bolt pattern is not equally spaced on the bolt circle. Use grade 8 bolts drilled for tie wire.
|
|
BLOVE
Bronze Level
Joined: 28 Dec 2017
Location: Sc
Points: 4
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2018 at 6:46am |
Im referring to the studs that are on the back side of the hub. These studs look like they are 3/8" on top and 1/4" on bottom. These can be seen from the throw out plate side. Thanks for your help
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 999
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2018 at 7:38am |
|
These screws are bolted to the ring hub (4 screws)
|
|
BLOVE
Bronze Level
Joined: 28 Dec 2017
Location: Sc
Points: 4
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2018 at 8:10am |
Yes!!! That is correct. Do you have any idea where I may be able to find these? Thanks
|
|
Ages Cat
Orange Level
Joined: 12 Sep 2009
Location: Hutchinson, MN
Points: 696
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2018 at 3:52pm |
|
Go to Caterpillar.
|
|
Curt Anderson
HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025,
|
|
gemdozer
Orange Level
Joined: 17 Sep 2009
Points: 999
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Mar 2018 at 5:27pm |
|
These screws are special screws ALLIS CHALMER and I check tomorrow if am still have some off these.( no list)
|
|
Dozer
Orange Level
Joined: 16 Aug 2011
Location: SW New York
Points: 689
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Mar 2018 at 7:10am |
|
Purchase bolts and modify them to make the correct studs. This is what keeping classic machinery is about.
|
|
