| Author |
 Topic Search  Topic Options
|
combinechris 
Silver Level
Joined: 20 Jul 2015
Location: wittenberg,Wi.
Points: 424
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D15 transmission gears
Posted: 09 Nov 2017 at 12:55pm |
|
where's a good supplier to get transmission gears for an early 1961 D15 tractor. I plan on restoring mine and need to go through the whole tractor from front to back with the restoration.
Edited by combinechris - 09 Nov 2017 at 12:55pm
|
|
35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90
|
 |
|
Sponsored Links
|
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24864
|
Post Options
Thanks(1)
Quote Reply
Posted: 09 Nov 2017 at 1:07pm |
|
don't know BUT if the PTO lever is the same as my D-14 replace the 25 cent O-ring while it's all apart !!
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
combinechris
Silver Level
Joined: 20 Jul 2015
Location: wittenberg,Wi.
Points: 424
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Nov 2017 at 1:51pm |
will be replacing a lot of the seals on it . 
|
|
35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3804
|
Post Options
Thanks(1)
Quote Reply
Posted: 09 Nov 2017 at 2:09pm |
|
A&I makes transmission gears. Im not sure what is available for D15 but some of our sponsors may sell them. I know they make for 190 and others
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
Gary
Orange Level Access
Joined: 13 Sep 2009
Location: Peterborough,On
Points: 5909
|
Post Options
Thanks(1)
Quote Reply
Posted: 09 Nov 2017 at 3:10pm |
|
Chris
The good news about the early D Series transmission gears is they are practically all the same.
Ie CA, D-10, D-12, D-14, D-15, also some in D-272 and ED-40
Gary
|
|
Joe(TX)
Orange Level
Joined: 11 Sep 2009
Location: Weatherford. TX
Points: 1682
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Nov 2017 at 5:00pm |
|
Some of the gears are different but can used it the mating gear is replaced with it. You would have to know the serial number breaks. Check the parts book.
|
|
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
|
DennisA (IL)
Orange Level
Joined: 11 Sep 2009
Location: Ridott IL.
Points: 2075
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2017 at 9:01am |
|
AGCO still supply's gears but are very pricey. A & I may sell a few as well. Just remember that all the gears from the CA-D-15 are interchangeable, just be careful as the gears had rev changes and must be changed in pairs or sets.
|
|
Thanks & God Bless
Dennis
|
|
Bill Deppe/AC Salvag
Orange Level Access
Joined: 12 Sep 2009
Location: Maquoketa, Iowa
Points: 974
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2017 at 5:38pm |
Early CA gears may not be interchangeable with the later. Parts book shows a change from CA 13291
|
|
Oldskewl
Bronze Level
Joined: 27 Aug 2017
Location: Northern NY
Points: 20
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Nov 2017 at 6:46pm |
|
I repaired my transmission 1960 D15 and didn't buy anything in fact if you buy the gears and reassemble like it was from factory it will for sure do the same thing it did from the factory you have to fill and recut the detents so it shifts all the way into gear in every case I have seen 1/3 of the drive cog is being used if you polish it up and make it shift the other 2/3 of cog left will last longer then new parts. Also build up and re file shift forks to match the collars again and make sure it moves reverse gear out enough that third gear no longer rides on it when engaged. This job is not for the easily intimidated but with or without parts you need to follow all these steps or they will do the same thing again Dr Allis has a good post about it on here.
Edited by Oldskewl - 10 Nov 2017 at 6:47pm
|
|
Fred in Pa
Orange Level
Joined: 13 Sep 2009
Location: Hanover Pa.
Points: 9210
|
Post Options
Thanks(1)
Quote Reply
Posted: 11 Nov 2017 at 6:34am |
I have factory chart that shows when using gears how to match them up ,I also am right now rebuilding (changing ring n pinion ) a D-15 trans for a customer . Can scan and post chart later this weekend
|
|
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|
combinechris
Silver Level
Joined: 20 Jul 2015
Location: wittenberg,Wi.
Points: 424
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2017 at 10:28am |
|
thanks Fred. by the way guys my D15 serial number is D15-5442
|
|
35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90
|
|
DonDittmar
Orange Level
Joined: 15 Sep 2009
Location: MIllersburg, MI
Points: 2516
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Nov 2017 at 8:27pm |
|
That chart would be great Fred. I have 2 D15's on the back burner lol
|
|
Experience is a fancy name for past mistakes. "Great moments are born from great opportunity"
1968 D15D,1962 D19D
Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start
|
|
Fred in Pa
Orange Level
Joined: 13 Sep 2009
Location: Hanover Pa.
Points: 9210
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Nov 2017 at 7:28pm |
Also sent you a few other print outs to your e-mail
Edited by Fred in Pa - 14 Nov 2017 at 6:14am
|
|
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|
coggonobrien
Orange Level Access
Joined: 14 Nov 2010
Location: Eastern Iowa
Points: 1867
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Nov 2017 at 6:21am |
|
djs has gears
|
|
