| Author |
 Topic Search  Topic Options
|
grinder220 
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2367
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 8550 hydraulic noise/vibration
Posted: 10 Oct 2017 at 8:47pm |
|
The pump on the rear end has made a load whine/groan noise as long as I've owned it (10 years),sounds like its running out of oil. Its not constant,it comes and goes all on its own. When it does this the big line that goes to the spool valves and PTO valve will vibrate rapidly. It has no effect on hydraulic functions. Any ideas?
|
 |
|
Sponsored Links
|
|
|
MACK
Orange Level
Joined: 17 Nov 2009
Points: 7664
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Oct 2017 at 8:56pm |
|
Most likely a hydraulic line touching metal somewhere. MACK
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2367
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Oct 2017 at 10:27pm |
|
No this is something internal and loud. All the lines are isolated. When a remote lever is pulled it makes a similar sound just not as loud. But like I said it's spuratic whether tractor is just sitting idling or out working.
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2367
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2017 at 10:00am |
|
Bump
|
|
darrel in ND
Orange Level
Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8688
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2017 at 8:41pm |
|
have you ever checked stand by pressure? Darrel
|
|
Kevin in WA
Orange Level Access
Joined: 08 Feb 2010
Location: Lynden, WA
Points: 612
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2017 at 10:07pm |
|
Like Darrel said, check standby pressure, to make sure its not running in high pressure mode all the time, does it have 3 point? feedback linkage could be out of adjustment causing it to run in high pressure.
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2367
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2017 at 10:18pm |
|
No I haven't checked pressure. Doesn't have a 3 point. If the pressure is high what needs to be done?
|
|
rustydollar
Orange Level
Joined: 07 Aug 2017
Location: Manitoba
Points: 456
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 Oct 2017 at 10:42pm |
 grinder220 wrote:
The pump on the rear end has made a load whine/groan noise as long as I've owned it (10 years),sounds like its running out of oil. Its not constant,it comes and goes all on its own. When it does this the big line that goes to the spool valves and PTO valve will vibrate rapidly. It has no effect on hydraulic functions. Any ideas? |
The reason your hydraulics work fine is because the first pump in your hydro unit is the charge pump. Charge pump has implement ports that supply hydraulic oil for the tractors accessories. I would suggest changing the filter, if it's obstructed in any way the charge pump will be short of a continuous oil supply. When I change a filter I always cut it open to examine the paper cartridge for foreign material. No metallic particles is always good news.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21400
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2017 at 7:14am |
|
Connect a 3000 psi gauge to the JIC tee with the cap on it on the side of the PTO valve. Remove the cap and connect the gauge. Pressure with engine running should be a steady 350 to 600 psi with hydraulics at rest. Pressure should be a steady 2500 psi when you activate and hold any remote lever. What do you have.
|
|
grinder220
Orange Level
Joined: 11 Jan 2012
Location: Clinton Iowa
Points: 2367
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Oct 2017 at 12:34pm |
|
I'll check pressure this weekend.
|
|
