![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
45 hand clutch |
Post Reply ![]() |
Author | |
LaJaMe ![]() Bronze Level ![]() Joined: 14 Sep 2014 Location: wisconsin Points: 172 |
![]() ![]() ![]() ![]() ![]() Posted: 20 Jun 2017 at 4:16pm |
Need some further help. Got hand clutch cover off and have a manual, but not sure what is up. I have taken 2 of the bolts out on the basket and took the 1/8 inch block out of one position. Thought there were shims, but no. The manual just points to that and calls it shims. Looks like I have excess clearance between plates. Do I replace this block with shims, a narrower block or what? Wish I was older so I could remember what what my dad did. Other question is were would I get shims? Yesterdays tractor does not list them. Thanks for any and all help.
|
|
![]() |
|
Sponsored Links | |
![]() |
|
den/southern illinoi ![]() Orange Level ![]() ![]() Joined: 11 Sep 2009 Location: Sparta, Illinoi Points: 2068 |
![]() ![]() ![]() ![]() ![]() |
You may want to look at that "block" closer. The shim pack is so tight that it may
look like one piece of metal. If it is one solid block, I do not have an answer to your question. Den |
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts. |
|
![]() |
|
Pilot172000 ![]() Silver Level ![]() ![]() Joined: 07 Jun 2014 Location: Winnsboro, LA Points: 195 |
![]() ![]() ![]() ![]() ![]() |
Thinking of doing same. Did you break the tractor in half to pull the hand clutch off?
|
|
Behind every great farm is an orange tractor!
|
|
![]() |
|
Don(MO) ![]() Orange Level ![]() Joined: 12 Sep 2009 Location: Bates City MO. Points: 6862 |
![]() ![]() ![]() ![]() ![]() |
Like said above the shims might be stuck to the spacer blocks, if there's no shims left and you have to much clearance between plates it might be time to over-haul the hand clutch.
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
![]() |
|
jiminnd ![]() Orange Level ![]() Joined: 16 Sep 2009 Location: Rutland ND Points: 2303 |
![]() ![]() ![]() ![]() ![]() |
Agree, when I took WD apart the shims were so stuck together you thought it was one piece. Took a knife and started scrapping and found out it was several pieces.
|
|
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
|
![]() |
|
j.w.freck ![]() Orange Level ![]() ![]() Joined: 16 Sep 2009 Location: karnack texas Points: 1153 |
![]() ![]() ![]() ![]() ![]() |
when you go to repairing the hand clutch in frame,you had better line the cavity with towels and what ever,if you drop a a shim,washer or bolt in that cavern you will understand what I mean.....
|
|
![]() |
|
Auntwayne ![]() Orange Level ![]() Joined: 23 Apr 2011 Location: Edwardsville Il Points: 1589 |
![]() ![]() ![]() ![]() ![]() |
We used a carpenters utility knife "box cutter" to separate the shims. Works like a charm.
|
|
Dad always said," If you have one boy, you have a man. If you have two boys, you have two boys". "ALLIS EXPRESS"
|
|
![]() |
|
AaronSEIA ![]() Orange Level ![]() Joined: 11 Sep 2009 Location: Mt Pleasant, IA Points: 2573 |
![]() ![]() ![]() ![]() ![]() |
You do not need to split it to work on the shims. Remove the battery box and the humped cover and you will have access to the hand clutch.
AaronSEIA |
|
![]() |
|
MACK ![]() Orange Level ![]() Joined: 17 Nov 2009 Points: 7664 |
![]() ![]() ![]() ![]() ![]() |
45 had a shim pack plus a spacer. After all shim have been taken OUT, replace it with a new shim pack.
Yes, the plates are getting pretty thin. MACK |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |