| Author |
 Topic Search  Topic Options
|
JimWenigOH 
Orange Level
Joined: 12 Sep 2009
Location: NC Ohio
Points: 1183
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 8000 Series Tail lights
Posted: 28 Apr 2016 at 9:11pm |
|
A previous owner had put reflective tape on the lower edge of the cab on back where the red tail light was originally. I peeled the tape off, and on the left side there was a 1"+ hole under the tape along with some screw mounting holes. On the right side there were only the screw mounting holes, no large hole for the bulb well on the back side of the light asy. I would have thought there would have been a tail light on each side, but looking in the Parts Catalog, it just shows a quantity of one. I ordered two lamp asy. P/N 71504455 and received Truck-lite lamps that looked just like the amber flashers up above. Anyone have the factory original tail light on their cab, and was there only one?
|
 |
|
Sponsored Links
|
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8612
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2016 at 9:19pm |
|
Don't think mine has one....hafta look.Which side is it on?
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7495
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2016 at 9:24pm |
The 8000 is the same as my 6080. On the left fender is a bolt on reflector AND red tail light. The right side only has the reflector. I got the reflectors from NAPA, I had to get the light right from AGCO. Everything bolted on and fit perfectly. This is one of the few pictures of its rear end, you should be able to see everything you need ... 
Edited by DSeries4 - 28 Apr 2016 at 9:32pm
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Unit3
Orange Level
Joined: 17 Oct 2009
Location: NC Iowa
Points: 5595
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2016 at 9:41pm |
|
Without going out to look, I will say there is only one on the left side. Would have been great to have them on each side with brake lights in them.
|
|
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
|
Michael V (NM)
Orange Level Access
Joined: 12 Sep 2009
Location: NM
Points: 2464
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2016 at 10:36pm |
|
my 8010 has just 1 red tail light,,had to replace it,, IIRC the original was branded "truck lite", I'll bet all the lights that were used were the same brand
|
|
Kevin in WA
Orange Level Access
Joined: 08 Feb 2010
Location: Lynden, WA
Points: 612
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Apr 2016 at 11:09pm |
|
Yes, just one tail light is all they had.
|
|
Daehler
Orange Level Access
Joined: 23 Nov 2010
Location: Lexington MO
Points: 1159
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Apr 2016 at 6:31am |
|
They were truck lite. I can get the number of what you need when this evening for you. Bought mine through Napa. Only difference was it was a three wire lite with 2 grounds.
|
|
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
|
JimWenigOH
Orange Level
Joined: 12 Sep 2009
Location: NC Ohio
Points: 1183
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2016 at 5:56pm |
|
Thanks for the information. The AGCO 71504455 light is a Truck-Lite 60 with an 1157 bulb and 3 wire pigtail, one each for stop, tail and ground. I did a search on eBay for that model light, and saw there are quite a few variants of the Model 60.
|
|
JimWenigOH
Orange Level
Joined: 12 Sep 2009
Location: NC Ohio
Points: 1183
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2016 at 5:59pm |
 DSeries4 wrote:
The 8000 is the same as my 6080. On the left fender is a bolt on reflector AND red tail light. The right side only has the reflector. I got the reflectors from NAPA, I had to get the light right from AGCO. Everything bolted on and fit perfectly.
This is one of the few pictures of its rear end, you should be able to see everything you need ...
|
Do you know the NAPA P/N for the reflectors, and were they stick-on or use fasteners?
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7495
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2016 at 9:26pm |
|
Don't know the part number. I took an old one with me and they had them on the shelf. New ones were actually BOTH stick on and used fasteners! Even though the originals did not use adhesive, the new ones were identical in every other respect.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
JimWenigOH
Orange Level
Joined: 12 Sep 2009
Location: NC Ohio
Points: 1183
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 May 2016 at 8:32pm |
|
Picked up the two red reflectors P/N 71504689, from AGCO today. They cost $2.49 each. I used some stainless steel machine screws I had on hand to mount them using the existing holes, perfect fit.
|
|
