| Author |
 Topic Search  Topic Options
|
BV 
Silver Level
Joined: 12 Sep 2009
Location: Bono Arkansas
Points: 486
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Any Oliver owners on here
Posted: 08 Apr 2024 at 4:32pm |
|
I know this is a long shot but I have a Oliver 1755 diesel 74 model so it's one of the last ones built with a shifter fork problem and I'm looking to trade for a D-17 Series IV, 170 OR 175, if this isn't possible don't bash me and I'll remove it but some of you guys that still use these on the farm would be a good workhorse, it's too big for me and I'm not able to do this kind of work anymore. It's located in Jonesboro, Arkansas, thanks again.
|
 |
|
Sponsored Links
|
|
|
CDN 400
Bronze Level Access
Joined: 05 Apr 2014
Location: On. Canada
Points: 81
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Apr 2024 at 4:38pm |
|
Do you know for sure its a shifter fork problem? Only reason I ask is I bought a 2255 a short while ago that you could only find 2 gears and it turned out to be very simple 5 minute fix.
|
|
BV
Silver Level
Joined: 12 Sep 2009
Location: Bono Arkansas
Points: 486
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Apr 2024 at 4:48pm |
|
I'm thinking it is, when I pulled the gear shifter out you can see the fork is loose, it's the one that shifts the transmission from high range to low range and I can move it around with a long screwdriver. It needs to top of the transmission removed to be 100% sure. I just bought this tractor and was supposed to be field ready but turned out with this problem, it has good rubber and runs good, shows 7100 hours on working tach.
|
|
1963D17
Bronze Level
Joined: 05 Jun 2021
Location: Alvord, Iowa
Points: 90
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Apr 2024 at 4:55pm |
|
The Olivers would break shift rails. I stocked them. they come out the front. If I remember correct you have to pull the engine and o/u to replace them.
|
|
CDN 400
Bronze Level Access
Joined: 05 Apr 2014
Location: On. Canada
Points: 81
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Apr 2024 at 5:32pm |
|
When you pulled the shifter out was the 2 springs in place?
|
|
BV
Silver Level
Joined: 12 Sep 2009
Location: Bono Arkansas
Points: 486
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Apr 2024 at 6:27pm |
|
Yes they were
|
|
Gary Burnett
Orange Level Access
Joined: 11 Sep 2009
Location: Virginia
Points: 3090
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Apr 2024 at 6:22am |
|
1755 is great tractor,I'd fix it.
|
|
BV
Silver Level
Joined: 12 Sep 2009
Location: Bono Arkansas
Points: 486
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Apr 2024 at 8:15am |
|
I may have to because there are no Oliver mechanics in my area
|
|
CDN 400
Bronze Level Access
Joined: 05 Apr 2014
Location: On. Canada
Points: 81
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Apr 2024 at 11:51am |
|
The reason I asked about the springs is because mine were missing and the shifter would bottom out and bind up. I went a got a couple springs and she was perfect. I was digging through the tool box on it one day and low and behold there were the original springs buried under junk.
|
|
BV
Silver Level
Joined: 12 Sep 2009
Location: Bono Arkansas
Points: 486
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Apr 2024 at 12:24pm |
|
yes they were there, it's the fork that's loose and I slid it back in place with a screwdriver
|
|
