| Author |
 Topic Search  Topic Options
|
51ACWD 
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 25-40 Carb and Breather setups
Posted: 03 Oct 2021 at 2:30am |
Before anybody says "Zenith C6EV" for a carburetor  hear me out. I have a mid year 1930 25-40, serial # 24737. I have a parts manual that lists that it should have a Kingston L3 carburetor, same as my '29 20-35. I know that many of the early 25-40's had an air breather that mounted at the rear of the engine, vs. the front as per the usual. If this is the case, did the Kingston carb setup have to be the rearward mounted breather on the 25-40, then when the switch to the Zenith C6ev happened, they went to the forward mounted air breather? I have the embossment on the side of my block for a rear breather, and whichever setup is correct for my year/serial number is what will dictate how I proceed with what parts I need to find.
|
 |
|
Sponsored Links
|
|
|
Gary(WI)
Orange Level
Joined: 27 Nov 2009
Location: WI
Points: 1005
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Oct 2021 at 8:35am |
|
We have an engine out of an early 25-40 engine number 45333 that has that setup on it. It has the rear air cleaner and a rear inlet carbureter would go on it, It would have been the Kingston carbureter L3 The carb was run with an extra linkage on the intake manifold.
|
|
Gary(WI)
Orange Level
Joined: 27 Nov 2009
Location: WI
Points: 1005
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Oct 2021 at 8:36am |
I have written down that I scrapped 25-40 # 24252 and 24439 so this engine may have come from one of them 2.
|
|
51ACWD
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Oct 2021 at 12:44pm |
|
Thanks Gary, that's definitely some information that'll help! I wonder when they switched from the Kingston to the Zenith?
|
|
51ACWD
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Oct 2021 at 10:02pm |
|
I found my engine number, and it's 45650. Not too far off of that number. Im suspecting it may have had this setup.
|
|
51ACWD
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Oct 2021 at 2:56am |
|
Bump
|
|
51ACWD
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Oct 2021 at 12:03am |
|
To the top!
|
|
51ACWD
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2021 at 4:00pm |
|
One more time
|
|
Leesok
Orange Level Access
Joined: 11 Sep 2009
Location: OK
Points: 517
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2021 at 8:19pm |
|
I have a 25-40 with Kingston carb and it has the front mounted air cleaner. It has mounting on the block for rear mount air cleaner and also has extra hole in the hood for rear mount. If I recall correctly it is a 1930 year model.
|
|
51ACWD
Silver Level
Joined: 24 Dec 2015
Location: United States
Points: 243
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2021 at 8:41pm |
|
Interesting. I know that the 20-35 Kingston and the 25-40 Kingston were bolted differently, seeing as how the 20-35 would have been the forward version yours have. I wonder if somebody needed one and put it on and swapped breathers. No telling with these old dinosaurs!
|
|
Leesok
Orange Level Access
Joined: 11 Sep 2009
Location: OK
Points: 517
|
Post Options
Thanks(0)
Quote Reply
Posted: 16 Oct 2021 at 10:58pm |
|
The Kingston carb intake is facing rearward. The air intake tube is just like on an A. Possibly someone changed it out at some point, it doesn’t look like it to me.
|
|
