![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
| The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History | |
D15 won't start |
Post Reply
|
| Author | |
Hubert (Ga)engine7
Orange Level
Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6554 |
Post Options
Thanks(0)
Quote Reply
Topic: D15 won't startPosted: 05 Jun 2017 at 11:30am |
|
A couple of years ago I converted my D15 to negative ground (12V) and installed a Pertronix ignition with Flamethrower coil and it ran great. Saturday it would only attempt to fire off when I first started cranking. Checked fuel flow - it is good. I get decent spark when I first start to crank, then no spark or very intermittent spark (coil wire to ground). Connections are all good and the battery has a fresh charge. Has anyone had problems with the ignitor modules on these? I plan to head back to the farm later this week to do some more trouble shooting. Thanks in advance.
|
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
| Sponsored Links | |
![]() |
|
Brian Jasper co. Ia
Orange Level
Joined: 11 Sep 2009 Location: Prairie City Ia Points: 10508 |
Post Options
Thanks(0)
Quote Reply
Posted: 05 Jun 2017 at 12:26pm |
|
How sure are you that the battery is good? Clip a good quality volt meter to the + side of the coil and crank it. If it drops below about 9.6v while cranking there's not enough voltage to crank and operate the ignition system. A dead cell in the battery is notorious for this. Engine cranks but won't fire.
|
|
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
![]() |
|
Hubert (Ga)engine7
Orange Level
Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6554 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jun 2017 at 7:36am |
|
Thanks, Brian. I should have thought to check for voltage drop Saturday. I will check that and also put a load tester on the battery. Maybe it won't be quite as hot in the barn and I won't be in a rush.
|
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
Hubert (Ga)engine7
Orange Level
Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6554 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Jun 2017 at 6:56pm |
|
Checked the voltage today and got 9.8+ when cranking, installed a battery with a fresh charge and got 10.5 volts when cranking. Guess I will be replacing the ignitor unit oe going back to points and condensor.
|
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
Hubert (Ga)engine7
Orange Level
Joined: 12 Sep 2009 Location: Jackson Cnty,GA Points: 6554 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Jun 2017 at 6:38pm |
|
Turned out to be the ignition unit. Put points and condenser back in and it runs great. Thanks Steve in NJ for your help. I will be calling Pertronix when I get back home.
|
|
|
Just an old country boy saved by the grace of God.
|
|
![]() |
|
Post Reply
|
|
|
Tweet
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |