| Author |
 Topic Search  Topic Options
|
allisrutledge 
Orange Level
Joined: 30 Mar 2010
Location: SurgoinsvilleTN
Points: 1360
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 210 grill shell
Posted: 09 May 2017 at 11:11am |
|
Without going into great detail , has anyone added anything to their hundred series grilles such as cable lanyards to keep them from mystersly unlatching when you are discing after dark by the moonlight and find it ran over by a dual at the end of the field where you turn , to only have a great day turn completely around? I would think that 2 cables inside fastened to give it enough room to be tilted out to unlatch a snaplatc on each side would keep this from happening.... AGAIN. Any other ideas or fixes? By the way my latches seem good. Thanks Scott
|
|
Allis Chalmers still exist in my mind and barns
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21965
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 11:31am |
|
On the pulling tractor, we use a couple of zip ties thru the screen and thru/around the square hood holes up at the top. Yes, you have to cut the zip tie to remove it, but it never falls off and gets run over (or disqualified).
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3804
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 11:39am |
|
On my 190XT i zip tied the latches closed. cant open without cutting
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
Mrgoodwrench
Orange Level
Joined: 03 Apr 2011
Location: CHICORA PA
Points: 2090
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 11:45am |
|
Is there a readily available replacement for those latches. I need about a million
Edited by Mrgoodwrench - 09 May 2017 at 11:45am
|
|
There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!!
|
|
Luke R.
Orange Level
Joined: 11 Sep 2009
Location: SE Iowa
Points: 1262
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 3:21pm |
|
I have new latches exactly like the originals. $12.50 plus shipping
|
|
4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F
|
|
Gary Burnett
Orange Level Access
Joined: 11 Sep 2009
Location: Virginia
Points: 3091
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 3:25pm |
|
2 eye bolts and a bungy cord,might not look great but it'll look better than a flat grille,
|
|
DanWi
Orange Level Access
Joined: 18 Sep 2009
Location: wttn
Points: 1929
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 5:52pm |
|
I bolt them on with metal straps behind the sheet metal, one on each side, only thing that shows is 7/16 bolt heads on the outside, better then a smashed grill. Either weld nuts to the metal straps or tap threads into them.
Edited by DanWi - 09 May 2017 at 8:57pm
|
|
Oldoug
Orange Level Access
Joined: 12 Sep 2009
Points: 1137
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 7:36pm |
|
I've got some grills for sale if needed. I've got one I would sell for $500.
|
|
Matt Folkers
FOLKERS RESTORATION
Restoring vintage things to last so the future can enjoy our past.
|
|
allisrutledge
Orange Level
Joined: 30 Mar 2010
Location: SurgoinsvilleTN
Points: 1360
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 9:03pm |
|
For now I put the zip ties on the latches but I got stainless cable and plates that I will add to it. Matt , I was able to straighten it way better than I ever thought, thanks to all, Scott
|
|
Allis Chalmers still exist in my mind and barns
|
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009
Location: Ontario Can.
Points: 4543
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2017 at 9:19pm |
|
Nasty thing to happen Scott. I have used zip ties as well . Also found a source of new SS latches exactly the same from an industrial supplier. Have a spare grill since I found a better one for my 210. Too wet here yet after 4" last week. Two more days!
|
|
Nothing is impossible if it is properly financed
|
|
lowell66dart
Orange Level
Joined: 10 Jul 2013
Location: Paulina La.
Points: 964
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2017 at 6:07am |
|
I have used the one's Luke sells and they are an exact match. All the holes line up perfectly.
|
|
AC 6080 (8030,7060,200,175,D-17HC, 6040,160,6140 all gone) Farmall 1066 & 656 Hi-Clear (for sale), White 2-62 High Clearance, JD 4255 Hi Clear.
|
|
coggonobrien
Orange Level Access
Joined: 14 Nov 2010
Location: Eastern Iowa
Points: 1864
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2017 at 6:57am |
|
we just replaced our latches when we painted it years ago
|
|
Dakota Dave
Orange Level
Joined: 12 Sep 2009
Location: ND
Points: 3971
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2017 at 7:24am |
|
My 190 has two sheet metal screws on each side going into the flange the grill seats on. I didn't notice them until I unlatched the grill and it didn't come off.
|
|
mruhlig77
Orange Level
Joined: 19 Aug 2014
Location: central Indiana
Points: 593
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2017 at 8:17am |
|
I can tell what we did...drill a hole through the middle of the grill into to brace behind it....then run a threaded bolt through the brace and secure it....you can then use a wingnut and washer on the outside to "safety" the grill....we put two on these on the loader tractor which takes lots of abuse..Mark
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8357
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2017 at 6:27pm |
|
That's what I do Mrruhlig, works great
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8645
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 May 2017 at 9:55pm |
|
don't envy you "tin" guys...you can push brush with my 220 nose LOL!
|
|
ACJake
Silver Level
Joined: 27 Dec 2012
Location: White Deer Pa
Points: 103
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 May 2017 at 3:22am |
|
What I did with my 210 was drill straight through between 2 slots in the grille to the front hood crossbar. (The 3 oblong holes behind the grille). I then put 2 bolts from the inside out facing the grille locktited in added a couple fender washers and then 2 air cleaner nuts on the outside of the grille. It turned out nice, kinda hard to describe can take pics and send them if you want to see. I have done this to all our 100/200 series except the 200. The zip tie trick works well too. I use zip ties on my 200 and all the deck plate battery box cover latches
|
|
3 WC's, 2 WD's, 3 WD-5's, D-14 w/HenryBackhoe, D-17, 4 D-19's, 185, 190XTsIII, 200, 210, 7010, 10 L&G Allis's. Nunn Better Farms Bleed Orange!!!!!
|
|
