| Author |
 Topic Search  Topic Options
|
Dave H 
Orange Level
Joined: 11 Sep 2009
Location: Central IL
Points: 3583
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: D 15 II Steering Shaft Support
Posted: 13 Jul 2015 at 8:41pm |
|
227768-9 and 227770-5
Seems to me like this should be an easy one.
Where in the heck does that bracket screw into the block or maybe I should say where does it mount?
thanks
Edited by Dave H - 13 Jul 2015 at 8:42pm
|
 |
|
Sponsored Links
|
|
|
DiyDave
Orange Level Access
Joined: 11 Sep 2009
Location: Gambrills, MD
Points: 54137
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jul 2015 at 8:44pm |
|
not a number expert, but I think they bolt to the side rail, IIRR
|
|
Dave H
Orange Level
Joined: 11 Sep 2009
Location: Central IL
Points: 3583
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jul 2015 at 9:09pm |
|
Dave, after I re read my post it is vague. I am referring to the steering shaft support that I think goes on portion of the shaft that is closest to the where the shaft connects to the front pedestal. I have the block with the bushing in it and the bracket.
it has just been so long that i don't remember where the bracket attached.
I will be looking at the inside of the side rail as you suggested.
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7505
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jul 2015 at 9:26pm |
It actually goes closer to the torque tube. The shaft does not need any support where it goes in to the coupling on the front end. Look closely in this pic. At the right side of the frame rail, you will see the stud of a bolt in one of the holes - that is the bolt that secures the block in question. 
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
Dave H
Orange Level
Joined: 11 Sep 2009
Location: Central IL
Points: 3583
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jul 2015 at 7:12am |
|
Thanks Myron, that makes perfect sense.
By the way, how did you get that sediment bowl assembly shined up like it is ?
How about those fasteners like on the side covers. They really dress it out. If stainless, is there a source you would recommend. Locally I don't think I would be willing to get the piggy bank out to buy them.
|
|
desertjoe
Orange Level Access
Joined: 23 Sep 2013
Location: New mexico
Points: 13696
|
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jul 2015 at 9:03am |
WHEW,,,,that right there is one fine, fine, looking tractor,,,,,!!! 
|
|
