This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Electric Forums |
Post Reply |
Author | ||
Coke
Silver Level Joined: 30 Sep 2018 Location: MIdwest Points: 215 |
Post Options
Thanks(0)
Posted: 08 Nov 2020 at 9:57pm |
|
Anyone know of any forums or groups out there dedicated to electrifying older model tractors?
All that battery weight is better than calcium filled tires. |
||
1957 D17 Diesel w/ M&W Pistons
|
||
Sponsored Links | ||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
there is a company building electric tractors right now. however they are new. can't remember the brand right now. i would imagine the hardest part of doing an old one is finding the batteries and controlers/motors. take a look at golf carts and maybe build accordingly?
|
||
DanWi
Orange Level Access Joined: 18 Sep 2009 Location: wttn Points: 1707 |
Post Options
Thanks(0)
|
|
The coop uses a duetz tractor that they have a conveyor on to pile corn on the blacktop. When the motor went bad someone rigged up an electric motor so it can be driven around the yard. Only can drive as far as the electric cord reaches though.
|
||
Coke
Silver Level Joined: 30 Sep 2018 Location: MIdwest Points: 215 |
Post Options
Thanks(0)
|
|
I'm gonna need a really long extension cord then Seriously tho' I think shameless is talking about Solartec or Solatrac I forget the name, they reckon on a battery life of 3-6 hours depending on load, and the packs are replacable. I imagine the premise being you just drop a new one in and keep going, I rarely use mine for more than a couple of hours at a time, and I always hook it up to the charger (because the generator doesn't work). I could even think about some solar panels at the south end of the shed. My dad worked in the garage of a local dairy for 30 years, back when milk was delivered daily, so I've seen a lot of short range, high torque, electric vehicles, and with the controller technology available now, I think even using lead acid packs, you could get better finesse out of them. Edited by Coke - 09 Nov 2020 at 8:45am |
||
1957 D17 Diesel w/ M&W Pistons
|
||
Kansas99
Orange Level Access Joined: 26 Feb 2015 Location: W Kansas Points: 4810 |
Post Options
Thanks(0)
|
|
Here ya go, nothing a little pocket change won't get. Not sure what it costs to get a steering wheel.
The 30 HP diesel-equivalent eFarmer provides unparalleled visibility and maneuverability for the next generation of row-crop farming. 4-8 hours with 28kWh battery pack, depending on loads. Additional battery packs may be added on any of the hitches to extend runtime. BATTERY RUNTIMEBATTERY Charging3 hour quick charge for one pack, or an overnight slow charge for 2 packs. Battery management system (BMS) automatically protects the batteries during charging and discharging. A simple joystick controls steering and speed, which allows for easy navigation between row crops. Rates of speed are variable and controlled by joystick position. steering/speedIncludes front hitch for low lift loader or reaper, mid hitch for precision cultivation tools and rear hitch that accepts all Category 1 - 540 RPM -PTO implements 3 point hitch/ implementsBASE PRICE: $49,500OPTIONSFront Loader: $1000Exchangeable Battery Pack: $10,000Edited by Kansas99 - 09 Nov 2020 at 9:18am |
||
"LET"S GO BRANDON!!"
|
||
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29651 |
Post Options
Thanks(0)
|
|
30hp, who are they kidding Row Crop!!!!
|
||
Coke
Silver Level Joined: 30 Sep 2018 Location: MIdwest Points: 215 |
Post Options
Thanks(0)
|
|
Maybe the need to bring back the bottom plow measurement, it's all about the torque, not the horsepower after all.
|
||
1957 D17 Diesel w/ M&W Pistons
|
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
Yeah yeah, DC motor torque through the roof when it's stalled. Which is another way of saying you aren't going anywhere! So, with weight and torque, you can pull something. Without actual horsepower, you won't be doing so at any speed worth doing. Edited by Tbone95 - 09 Nov 2020 at 12:07pm |
||
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77975 |
Post Options
Thanks(0)
|
|
YEP... Torque is a FORCE.... Horse Power takes some movement, SPEED / RPM into effect... I can get TORQUE out of a torque wrench.. but it is not MOVING.
|
||
Like them all, but love the "B"s.
|
||
Coke
Silver Level Joined: 30 Sep 2018 Location: MIdwest Points: 215 |
Post Options
Thanks(0)
|
|
|
||
1957 D17 Diesel w/ M&W Pistons
|
||
Kansas99
Orange Level Access Joined: 26 Feb 2015 Location: W Kansas Points: 4810 |
Post Options
Thanks(0)
|
|
You should go to the site, it looks like a bicycle frame with 4 wheels. The loader is quite impressive probably hold 1/2 a wheel barrel. If they build a actual row crop tractor I dare say it's going to be a little pricey. Only costs a extra $10,000 for a spare battery pack.
Edited by Kansas99 - 09 Nov 2020 at 1:06pm |
||
"LET"S GO BRANDON!!"
|
||
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77975 |
Post Options
Thanks(0)
|
|
Really, you can torque your nuts without any movement, what a scientific achievment that must be.
YES... you are doing WORK while you tighten the nuts, but when you reach TORQUE and STALL OUT... NO WORK... NO HP. Its a hard concept to accept, but you can PUSH on a building all day long and wear yourself out.. If it DONT MOVE, then there was no WORK or HP..... you need MOVEMENT.
|
||
Like them all, but love the "B"s.
|
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
OK, well, tiny amount of movement compared to plowing a field, and time is completely irrelevant. So no POWER. |
||
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77975 |
Post Options
Thanks(0)
|
|
What is the formula of work?
Work is done when a force that is applied to an object moves that object. The work is calculated by multiplying the force by the amount of movement of an object (W = F * d). A force of 10 newtons, that moves an object 3 meters, does 30 n-m of work. How do you calculate power in physics? Power equals work (J) divided by time (s). The SI unit for power is the watt (W), which equals 1 joule of work per second (J/s). Power may be measured in a unit called the horsepower. One horsepower is the amount of work a horse can do in 1 minute, which equals 745 watts of power. Edited by steve(ill) - 09 Nov 2020 at 1:21pm |
||
Like them all, but love the "B"s.
|
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
I would say, what he's getting at, if you go from free spinning the nut with your fingers, then from snug you put a torque wrench on them, they move. But of course we know, they move very little, and as you say, you can hold that static torque there the rest of your life and do no work. |
||
Coke
Silver Level Joined: 30 Sep 2018 Location: MIdwest Points: 215 |
Post Options
Thanks(0)
|
|
But you can't reach the set torque without moving (torquing) your nuts first. Unless all you deal with is rusty nuts, that you try and tighten, which I guess is possible.
|
||
1957 D17 Diesel w/ M&W Pistons
|
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
Coke, I don't think anyone is arguing that little piece of the puzzle. Thing is, you don't plow a field with torque, you have to get it done with power. The high stall torque of a DC motor diminishes to a balance of torque and speed when you're using it at any appreciable rate, it has to. And you're not putting out any power using a torque wrench.
Put another way, to plow 2 acres per hour is going to take a certain amount of horsepower, 60 is probably a good round average figure properly weighted, and it's going to take that regardless of where that power comes from. Torque is part of that power, so is the speed at which you can do it. |
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
In other words, it's not constant movement, you move the nut on the thread until the load is reached, from that point it's all static, like steve's analogy of pushing on a building, there's a force there, but no work accomplished, therefore no power is present either. |
||
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77975 |
Post Options
Thanks(0)
|
|
i think i screwed up using the torque wrench... i should have used the example of an Allis G hooked to a 8 bottom plow !!
|
||
Like them all, but love the "B"s.
|
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
|
||
Coke
Silver Level Joined: 30 Sep 2018 Location: MIdwest Points: 215 |
Post Options
Thanks(0)
|
|
Which is what I said
I also asked
And from y'all, I'm guessing the answer is no. Google it is then.
|
||
1957 D17 Diesel w/ M&W Pistons
|
||
Tbone95
Orange Level Access Joined: 31 Aug 2012 Location: Michigan Points: 11399 |
Post Options
Thanks(0)
|
|
There could be a forum such as you suggest, beats me. I’d have googled that in the first place.
|
||
steve(ill)
Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 77975 |
Post Options
Thanks(0)
|
|
|
||
Like them all, but love the "B"s.
|
||
Kansas99
Orange Level Access Joined: 26 Feb 2015 Location: W Kansas Points: 4810 |
Post Options
Thanks(0)
|
|
What's he got on the front of that unit? Never seen that before, I'm assuming something for a specialty crop?
|
||
"LET"S GO BRANDON!!"
|
||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
the one i saw was a tractor looking tractor (on the small side) was all electric, could plow for 6-8 hours (3 bottom) on a full charge and recharge overnight. plugged into 120 Volt outlet. i'll dig around and see if i can find the pics and story again. Coke....as for recharge or maintain charge, years ago i bought a HF solar battery charger. it works, just takes a day or 2, one time i left my 180 out in the field, i musta forgot the radio on, cuz the next morning the battery was dead. i tarp strapped that charger on top of the hood and hooked it up to the battery, i got back to the tractor 2 days later and it started right up! maybe that would be your cheapest route on your tractor. maybe extend the cord, mount on your shed and hook up the wires to your tractor battery until you use it again?
|
||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
saw alot of different electric tractors on you tube, also there is a video of how to change a garden tractor over to electric, might could get you info off that, shouldn't be that much different from a garden tractor to one a little bigger? i think the battery costs are still prohibitive yet for outright buying. the dude that builds all electric tractors in CA says as time goes on the batteries are getting cheaper. he's the dude that makes the tractor that Steve (ill) posted above. he had alot of info on his video. i was unable to get any pricing on any of the electric tractors already in production, prolly hafta call each company to get that. i would have a use for one, more than my diesel/gas tractors. just think...no more oil/filter changes, no more plugs/wires/mags/coils/caps/def/fuel/anti-gel/antifreeze/ect. the dude says the batteries are good for around 12 years, and they are working on or already have batteries that will last 100 years. i think i'm pumped on this! but check you tube vid on the change over.
|
||
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 21547 |
Post Options
Thanks(1)
|
|
The two 'minor' problems with ANY battery powered device, especially a tractor are 1) ACTUAL runtime in the field doing WORK... 2) COST to recharge the battery pack #1 is kinda important.Even though I don't farm, I know farmers and it's not unreasonable for them to put in 12-16 hr days to get the crops in ( IN before the rain comes.....,sigh). I seriously doubt ANY electric tractor can run like that.. #2 is REAL important. There is no way come hades or high water, that a 'simple, plug into a 120 receptacle' recharger will juice up a dead tractor battery. You need a SERIOUS charging 'station'....240 volts, 50-60 amps and time. Just look at Tesla charging options.... I know at 25c cents/KwH( my current cost) it costs a lot REAL money . As for 'the dude says the batteries are good for around 12 years,'.... yeah right, maybe if they stay on the shelf, get used for an 1hr a day, in sunny ,warm So CAL... but NOT up here in Winter ( 4-6 months)...
|
||
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
||
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |