CA Brake Locks

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   The brake lock mechanisms ride atop the platform fingers at the front.  This makes adjusting the brakes where I want them a bit difficult.  Make them just a little bit snug and the locks won't rise over the fingers without difficulty.  There are two rectangular 'washers' that go with the platform.  They have square corners on one long side and rounded corners on the other long side, with a single hole in the center.  Looking at the installation drawings, it seems to imply these go at the rear of the platform (not clear exactly where).  But I've seen some attach them across the fingers at the front of the platform (which would make the brake lock even more difficult to latch).  How are these latches (and washers/spacers) supposed to ride relative to those front platform protrusions?

Edited by dfwallis - 07 Aug 2025 at 10:44am

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
dfwallis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 09 Mar 2023 Location: DFW Points: 797	Post Options Post Reply Quote dfwallis Report Post Thanks(0) Quote Reply Topic: CA Brake Locks Posted: 07 Aug 2025 at 9:53am
	The brake lock mechanisms ride atop the platform fingers at the front. This makes adjusting the brakes where I want them a bit difficult. Make them just a little bit snug and the locks won't rise over the fingers without difficulty. There are two rectangular 'washers' that go with the platform. They have square corners on one long side and rounded corners on the other long side, with a single hole in the center. Looking at the installation drawings, it seems to imply these go at the rear of the platform (not clear exactly where). But I've seen some attach them across the fingers at the front of the platform (which would make the brake lock even more difficult to latch). How are these latches (and washers/spacers) supposed to ride relative to those front platform protrusions? Edited by dfwallis - 07 Aug 2025 at 10:44am
	1952 CA13092

Sponsored Links