This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Allis F40 fork lift |
Post Reply | Page <1 891011> |
Author | |
JohnColo
Orange Level Joined: 03 Apr 2020 Location: Niwot, CO Points: 1258 |
Post Options
Thanks(0)
|
Hopefully the light isn't coming through the roof!
|
|
Sponsored Links | |
DiyDave
Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 51401 |
Post Options
Thanks(0)
|
Reminds me of a story one of my neighbors told me about Someone else, in the neighborhood, you know, the soandso's. Every neighborhood has some soandso's... Anyway, Mr soandso was having a problem reading the evening papers, said them new-fangled 'lectric lights was too dim to read by, so he calls up the 'lectric co, to complain, they sends out a repairman to check, he comes outta the house, wif a light bulb, takes it over to the pump, pumps up a bucket of water, and proceeds to wash the bulb. Mr soandso has a puzzled look on his face, as he hands him the bulb back, repairman sez, if you put screens on da windows, flies won't sh!t up the bulbs!
|
|
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
|
structures
Silver Level Joined: 28 Feb 2011 Location: Beggs, OK Points: 333 |
Post Options
Thanks(0)
|
Y'all must've been by my place?!
|
|
Robert
1964 D15 Series II |
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
Where did everybody go?
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Snowman,
Maple syrup has gotten in the way. Each time I go to start the F40 it starts, it moves, it lifts it stops! It is setting aside in the shop being a good little machine. It is very happy to have a new home and a new lease on life. As the neighbor was going to send it to the scrap yard. I sunk a bunch of money in it but hoping it will be a useful tool for the shop! We need pictures of your F50 resto! Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22286 |
Post Options
Thanks(0)
|
'LilYellow' needs the rear rims painted... when (hehehe) you have some free time........ saps gotta be flowing good today !!!
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Jay,
I just got my head above the sap finally! Missed your post. I fired up the F40 today and moved some steel panels and a pallet of styrofoam, so I could get to my summer truck tires. The little F40 starts good on gas just needs to run on about 1/2 choke. I really haven't played with anything on the carb and have not done the needed tune up either. Has the normal Allis leak to mark its territory. Have the new front tires on the list oif things to do but the funds are currently going towards materials for the interior walls of the shop. Which I estimate might be done sometime in July! I plan to use the F40 to unload, and move, steel and massive amounts of wood also. Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22286 |
Post Options
Thanks(0)
|
well you've got your priorites right... 'make syrup while the saps flowing', kinda like the 'hay' line...... dang it was cold here this morning...37*F, so I NEED 1/2 choke as well to run !! Sounds like August will be your time to relax and organize the shop,lucky guy..... ..I'm thinking I'll be 'finding a good home' for my stuff next door about then.... oh well....have fun and be safe Jay
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Jay, Folks,
Was thinking I should probably sell some toys! Maybe the D17 should go down the road?
Yes August I should be able to set down and have a frosty beverage! Haven't heard from Snowman and his nice F50 on here. He must be totally jammed with boat work? Tis that time of the year. I have a stack of steel liner panels to pick up this week for the wainscoting in the shop. Hoping the little F40 is up to the task for unloading. Also all the inside trim. Snow stop and double angle trim, plus more J channel too. Kind of weird trimming the inside of the building in steel. But I am pretty weird so I guess it all makes sense. I have been pretty happy with the F40 so far. I am not a good operator yet, so I go pretty slow and easy. Haven't smashed anything yet! My neighbor that sold it to me, ask if I wanted to sell it, he was interested!:) Thanks for checking on me. I need a working Allis beer fridge! Regards, Chris |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(1)
|
Chris, glad to hear you are finding some uses for the forklift. Yes, it has been stupid busy with boats. Had to replace the starter in mine this week. She,s being a good girl now. Stay healthy, Ed
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Folks,
Got a bug and took this seat back to local shop. He does really nice work. He replaced the wood, painted the brackets and added stainless screws. Makes me want to get the seat base done too. Don't spend that much time on it, but it looked ratty, and everyone that comes in sees it! Regards, Chris
Edited by Sugarmaker - 08 May 2021 at 2:42am |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22286 |
Post Options
Thanks(0)
|
yep...it's a 'domino project'...jes like ALL of mine... while the seat base is being redone.. ..clean,prep, paint the seat mtg base ..clean ,prep, paint the forklift top there. ..clean,prep paint the grille by your shins.. ..yeah, do the side weights while yer there.... best do the rear rims too....... hehehe same up here... decided I NEED to add 7 Way RV powerplug on D-14 'Troy' to recharge dump trailer battery while using trailer. After 5 hrs seat time...load,haul,dump,load,haul dump.....more on Monday. sigh..no end of projects...... oh yeah, wife cleaned toaster(power cord still in wall, NOW it don't work.. nuther domino
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Jay,
Folks, Around here I have to restore a screw driver before I can use it! Yea I thought the same thing about the forklift and a refurb clean and paint project, Maybe someday?? I have this itch to change it back to propane for some reason? It is kind of smokey when running on gas? Maybe it would be less on propane?? Maybe the engine is tired and just burning oil?? Maybe I need to tune it up and time it for gas? Or adjust the carb?? Anyway it sets with a new seat back. Which really looks nice by the way. This local upholstery shop is a one man show and he does nice work! Regards, Chris |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Eric B
Orange Level Joined: 09 Feb 2012 Location: British Columbi Points: 922 |
Post Options
Thanks(0)
|
Chris, you make a very good point about the seat looking good. It sets the 'tone' for your rig and how we feel when we approach our piece of equipment is very important. When you go to sell a tractor don't even think of a successful sale with a ratty looking seat. First impressions are very critical. Tires and wheels are another determining factor in how you form your image of the overall 'status' of what you're looking at. That's why Jay mentions painting wheels . Chris, don't allow yourself to think we're picking on your progress :)
That backrest looks great! You mention stinky exhaust... one F40 I had, had a dirty exhaust problem which was reduced by 90% after removing excess restriction from the air cleaner/filter, no doubt the engine was starting to get tired. Keep on trucking... 'lift trucking' that is
|
|
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22286 |
Post Options
Thanks(0)
|
re: Around here I have to restore a screw driver before I can use it! hahaha I have to FIND the screwdriver, and by the time I do, I'm wonder WHAT do I need this for .......... sigh gettin old is fun...
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
tadams(OH)
Orange Level Access Joined: 17 Sep 2009 Location: Jeromesville, O Points: 10032 |
Post Options
Thanks(0)
|
[QUOTE=jaybmiller]
re: Around here I have to restore a screw driver before I can use it! hahaha I have to FIND the screwdriver, and by the time I do, I'm wonder WHAT do I need this for .......... sigh gettin old is fun... Edited by tadams(OH) - 08 May 2021 at 2:26pm |
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
Chris, guys Just checking in. Yep, the seat looks a lot better. I bought a complete one with track for $60.00. Feel a lot nicer to sit on. Did some more paint work At this rate will take years to finish? Was going to post a picture but guess I forgot how
|
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
OK, dumbass figured it out
|
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
Sort of
|
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
Chris, I run 4 qts of Shell rotella T-4 and 1 qt of Lucas oil stabilizer in mine, found that it reduced the smoking a lot. Good luck
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Snowman,
Darn that is getting to look really Good! Nice work scrubbing and painting the counter weight. Appreciate the info on the oil too. Share the paint type and color. Is it close to what the original was? Don't know if mine will ever look that good, but there is hope. Just need lots of money and much more time! Thanks for the pictures too. Boat season peak must have past? I sure do like my F40 in (our) shop! Will be using it to move hemlock around soon too. Have my gas tank to mount and other things still to do on mine. Easily distracted with new toys! Regards, Chris
Edited by Sugarmaker - 20 Jun 2021 at 7:08pm |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Snowman
Bronze Level Joined: 21 Jan 2020 Location: Phoenix AZ Points: 92 |
Post Options
Thanks(0)
|
The paint is CAT yellow. Bought it at a hardware store by me. No it does not match original color. Original was more of a mustard color. Still working on boats. I stopped getting notifications from the web site? Didn't know any one was posting. Stay healthy
|
|
LHENRY
Bronze Level Joined: 28 Feb 2022 Location: Latrobe pa Points: 2 |
Post Options
Thanks(0)
|
Hello. I have a allis chalmers f40 forklift, it has the wrong battery in it has the wrong battery in it now, can someone tell me the correct battery size for it?
|
|
LHENRY
Bronze Level Joined: 28 Feb 2022 Location: Latrobe pa Points: 2 |
Post Options
Thanks(0)
|
.
Edited by LHENRY - 01 Mar 2022 at 5:53am |
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22286 |
Post Options
Thanks(0)
|
don't know about 'right', but the biggest that fits onto the cradle is 'right'.
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
LHENRY,
I would agree with Jay. If it fits in the box it should work fine. Good luck with you forklift. Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
DaveKamp
Orange Level Access Joined: 12 Apr 2010 Location: LeClaire, Ia Points: 5738 |
Post Options
Thanks(0)
|
Chris- I didn't see any resolution to the chokey-smokey notes, but if you haven't YET... please check the point gap and ignition timing. When running gaseous fuels, the amount of spark advance is different, to accomodate fuel flame rates... if it's still running at propane timing, you're in for a substantial improvement. Small, and Tiny forklifts in the shop are fantastic... especially if you can pop the forks off, and put an overhead hook on them. Some guys take the backstop off and use the forks as the hook, which works, but guys then use the forks without a backstop (please don't) so that they don't hit overhead obstructions. Doesn't matter if you're experienced, or new- the best way to operate a forklift, is slow, gentle, and careful. Never forget that you have a heavy object hanging on the forks, and another heavy object hanging in front of the radiator... small as it may be, it is VERY heavy, and going over a pet, a child, or a foot, will be very, very permanent... and bumping into a wall, or vehicle, or piano, no matter how gently, will leave a very greasy impression on those objects, after they're shoved to one side. (who let that dumb spammer {ASP] in up there?)
|
|
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.
|
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8245 |
Post Options
Thanks(0)
|
Dave,
Time will tell if he is a spamer or a great Allis Forklift guy. Your thoughts on the timing and point gap may be right on the money! I have never done a tune up on this forklift. I really need to dig into that and if that solved half of the problem with the "old smokey syndrom" I would be happy. I mean she is really bad! So I need the correct plugs, points and the timing info. Where do I go to get that except maybe here or trial and error?? Regards, Chris |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
DaveKamp
Orange Level Access Joined: 12 Apr 2010 Location: LeClaire, Ia Points: 5738 |
Post Options
Thanks(0)
|
If you were ME, you'd just make sure the distributor shaft isn't sloppy, then dial the advance up about 4 degrees, then try it, and see how it responds. Typically, a gaseous (NG/Propane) application will run about 5 degrees LESS advance than liquid fuel. Reason... On a GOOD day, liquid fuel (gasoline) comes into the chamber only about half vaporized. That means, when the mixture is first touched off, the part which has evaporated AND mixed with air (it can be evaporated, but NOT aereated) will burn, and generate heat and pressure, which stirs up and improves evap of the rest. This kinda slows the whole flame-front down a bit... and of course, some doesn't get evaporated, so it goes out the exhaust valves. Remember how, in the distillate fuel (kerosene) setups, the fuel gets heated? It's heavier, and doesn't evaporate as well, so they preheat the fuel to help it evaporate. Natural gas doesn't come to us in liquid format, and propane evaporates either in the tank (gaseous withdrawl) or in the evaporator (the big round thing just downstream of the tank with the water hoses that you took off), so it doesn't need this. I suspect that, with the timing being a bit too advanced, she's probably not getting the flame far enough, fast enough, to burn clean. Road gaseous engines with mechanical and vacuum advance sometimes have different advance curves for similar reasons, but your forklift probably doesn't have it, it's probably all-out just above idle... or possibly BEFORE idle (meaning, it's retarded just for starting, and once running, it's all-out). Either way, if it DOES have an advance mech, make sure it ain't stuck.
|
|
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.
|
|
Post Reply | Page <1 891011> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |