| Author |
 Topic Search  Topic Options
|
INAllis 
Bronze Level
Joined: 14 Feb 2024
Location: Indiana
Points: 21
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 7040 hydraulic coupler tip ??
Posted: 02 Aug 2025 at 7:13pm |
|
New to me piece of equipment needs different hydraulic coupler (tips) can someone give me a parts numer or reference #, the male end that fits into tractor outlets to replace the balers current JD tips?? TIA
|
 |
|
Sponsored Links
|
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21820
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2025 at 7:19pm |
|
Common Pioneer BALL type tips.
|
|
im4racin
Orange Level
Joined: 12 Jun 2017
Location: Garrison ND
Points: 1053
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Aug 2025 at 10:12pm |
|
The original were not pioneer but drawing a blank on the brand. I think bruning. Pioneer will work as long as the implement doesn't spike back pressure. like a disk flopping over against the cyl. That will cause the pioneer tip to seat the check ball. Cycle lever in opposite direction to release and continue. pioneer will work just that case may give a little trouble
|
|
INAllis
Bronze Level
Joined: 14 Feb 2024
Location: Indiana
Points: 21
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2025 at 2:56am |
|
Thanks, reason I was asking bought 4 at TSC that appear the be identical but I have absolutely zero hydraulic function to baler regardless of which set outlets etc
Very frustrating I'll push on.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21820
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2025 at 7:00am |
|
When you raise or lower with each remote hydraulic lever you should be able to hear the hydraulic pump groaning ....
|
|
8070nc
Orange Level Access
Joined: 21 Mar 2019
Location: North Carolina
Points: 603
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Aug 2025 at 12:38pm |
|
Its possible the speed spools a turned to to low a flow to overcome the load
|
|
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
|
Ron(AB)
Orange Level
Joined: 27 Dec 2009
Location: Alberta
Points: 962
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2025 at 12:24am |
|
Bruning were on the 7000 series.
They are 10 times better than the Pioneer that most or all brands use now...
|
|
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21820
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2025 at 11:47am |
|
7000-series couplers were capable of coupling with balls or points. I don't remember the brand, but the two tip types was unique to me.
|
|
SteveM C/IL
Orange Level Access
Joined: 12 Sep 2009
Location: Shelbyville IL
Points: 8611
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2025 at 12:12pm |
|
Have a couple things here that have both balls and points on same unit. All work with 220 and 3 8000's
|
|
Lynn Marshall
Orange Level Access
Joined: 13 Sep 2009
Location: Dana, Iowa
Points: 2375
|
Post Options
Thanks(0)
Quote Reply
Posted: 05 Aug 2025 at 4:00pm |
|
As Ron said, they were Bruning couplers on the 7000 series. Pretty trouble free in my estimation. They would accept the Bruning male ends or the pioneer ends.
|
|
