| Author |
 Topic Search  Topic Options
|
Tbone95 
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12502
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: Tillage Question
Posted: 5 hours 23 minutes ago at 7:05am |
|
Not color specific.
What tool have you guys had luck with for tall and or thick sod?
My big moldboard plow does ok, but there are fields where it’s not too handy. And honestly…..it could be better.
Glencoe soil saver is a no-go, it’s plugging.
My most recent small plow is an IH 400. That plow does a wonderful job and pulls easily…right up until it doesn’t, then it’s miserable. In heavy sod, it rides up and gets caught on the shank and from there is all downhill. It seems to me the colters are too big and too close to the moldboard, and also not much clearance under the frame. You get to a point where you’re only 3 inches deep, then to a point where it still scoops up grass and it’s all plugged up.
Just curious if anyone has good luck in such a case.
|
 |
|
Sponsored Links
|
|
|
Lars(wi)
Orange Level Access
Joined: 14 Sep 2009
Location: Permian Basin
Points: 8571
|
Post Options
Thanks(0)
Quote Reply
Posted: 5 hours 2 minutes ago at 7:26am |
|
As for the grass/sod/trash on the surface, try disking the field first. Or, mowing, baling a crop off the land first. As for coulter and plow adjustments, get an owners manual for that specific plow. Does the the plow have ‘coverboards’? Some call them ‘trash boards’. Proper ground speed can also affect the performance of a moldboard plow.
|
|
I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science.
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 23527
|
Post Options
Thanks(0)
Quote Reply
Posted: 4 hours 38 minutes ago at 7:50am |
|
I've never done this, or for that matter even seen it done, but in the old days, they would tie a length of #9 wire on a coulter or somewhere on the frame, and that dragging wire would fold over the tall brush so it didn't plug.
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12502
|
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 19 minutes ago at 9:09am |
 Lars(wi) wrote:
As for the grass/sod/trash on the surface, try disking the field first. Or, mowing, baling a crop off the land first. As for coulter and plow adjustments, get an owners manual for that specific plow. Does the the plow have ‘coverboards’? Some call them ‘trash boards’. Proper ground speed can also affect the performance of a moldboard plow. |
There are two locations to mount the colters. Already in the farthest forward, won’t even fit in the rearward one. Makes me wonder if it’s the correct colters. I’m doing the mowing and baling. Would sure love to skip that and save the time and fuel. Nothing to do with coverboards, it doesn’t get that far and if it does it turns over fine.
|
|
Brian F(IL)
Orange Level Access
Joined: 14 Sep 2009
Location: Paxton, IL
Points: 2763
|
Post Options
Thanks(0)
Quote Reply
Posted: 3 hours 9 minutes ago at 9:19am |
|
My friend used to have a pair of IH #720 plows; 5-16' & 6-16". They would only plug in very heavy (and/or damp) cornstalks. Sod plowing was a breeze. FWIW.
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3789
|
Post Options
Thanks(0)
Quote Reply
Posted: 1 hour 44 minutes ago at 10:44am |
|
The later years AC 2000 plows had 32” of clearance. And if it was setup with high speed 392 moldboards, then even better.
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12502
|
Post Options
Thanks(0)
Quote Reply
Posted: 39 minutes ago at 11:49am |
Brian F(IL) wrote:
My friend used to have a pair of IH #720 plows; 5-16' & 6-16". They would only plug in very heavy (and/or damp) cornstalks. Sod plowing was a breeze. FWIW. |
I am so glad you made this comment! That is very specifically one of the things I wondered. Thanks!
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 12502
|
Post Options
Thanks(0)
Quote Reply
Posted: 37 minutes ago at 11:51am |
AC7060IL wrote:
The later years AC 2000 plows had 32” of clearance. And if it was setup with high speed 392 moldboards, then even better. |
I used to have one, it pulled great, and as I recall I turned over a lot of sod with it. I remember it doing very well. We had trouble sourcing wear parts for it is why we parked it. Since sold it.
|
|
