Taking a 5 bar AC side del rake and making 4 bar

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Long story short-  I took out all 5 bars now I need help

I am confused as to what holes the bars should go in to make 4 bars.  I thought I had that figured out,  but I think I have atleast one bar in the holes for 5 bars.

How far apart should the bars be?   (Physically measure is what I am asking)

On the way home puling it behind my pickup, one of the bars was rusted on a bolt hole that goes into a rake tooth and it broke- so in order to have factory bars and no welds, I decided to make a 4 bar hay rake.  I tried to get another bar at the salvage yard with no luck.  So now I am making it into a 4 bar rake

Any help would be appreciated- And I don't have a book for it either

Thanks!

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Darwin W. Kurtz Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 06 Apr 2010 Location: Westphalia, KS Points: 5471	Post Options Post Reply Quote Darwin W. Kurtz Report Post Thanks(0) Quote Reply Topic: Taking a 5 bar AC side del rake and making 4 bar Posted: 1 hour 13 minutes ago at 3:39pm
	Long story short- I took out all 5 bars now I need help I am confused as to what holes the bars should go in to make 4 bars. I thought I had that figured out, but I think I have atleast one bar in the holes for 5 bars. How far apart should the bars be? (Physically measure is what I am asking) On the way home puling it behind my pickup, one of the bars was rusted on a bolt hole that goes into a rake tooth and it broke- so in order to have factory bars and no welds, I decided to make a 4 bar hay rake. I tried to get another bar at the salvage yard with no luck. So now I am making it into a 4 bar rake Any help would be appreciated- And I don't have a book for it either Thanks!

Sponsored Links