Farm Equipment - 110 manure spreader PTO shield and bell

Print Page | Close Window

110 manure spreader PTO shield and bell

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56821
Printed Date: 22 Aug 2025 at 2:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 110 manure spreader PTO shield and bell

Posted By: Manure Queen
Subject: 110 manure spreader PTO shield and bell
Date Posted: 13 Sep 2012 at 9:25pm

I am currently restoring a 110 manure spreader which will continue to have a job (I have horses) and not just be a pretty face. I took the PTO driveline to a local tractor shop to have the universal replaced and in the process, they cut off the pto shield with a plasma cutter to gain access (I wasn't impressed). My spreader is a very early prototype, serial no. 31, and the shield was originally one piece (now two!, lengthwise). Sadly, finding original replacement parts is difficult. The parts nos. are 527231 and 527230 for the later model spreader which should fit. Anybody have any leads or suggestions? I need a shield that comes in 2 pieces so that (preferably) I won't have to alter the drive line to put it on as I would with a one piece. Thanks for your brainpower!

Replies:

Posted By: Tracy Martin TN
Date Posted: 13 Sep 2012 at 9:45pm

Post a pic of the PTO shield you need. Easier for folks that might have one laying around and not know what it fits. Makes finding one easier. Tracy Martin

Posted By: RichinWis
Date Posted: 14 Sep 2012 at 7:36am

You might want to check some of theAC mowers from that era. I think they had the Same guard
Set up on them.

Posted By: Manure Queen
Date Posted: 14 Sep 2012 at 10:06am

Excellent idea. Just scanned it from my parts catalog and will post this evening.

Posted By: Manure Queen
Date Posted: 14 Sep 2012 at 9:32pm

Sadly, I cannot get cut and paste to work with my iMac or I would happily post a parts book drawing of what I'm after. I believe this two piece PTO shield was used on all AC manure spreaders and I suspect mowers.

Posted By: Matt (Jordan,MN)
Date Posted: 14 Sep 2012 at 11:57pm

I checked the part numbers you listed. They are the same for the newer manure spreaders. I have some NOS pto shields but there is no number on them. If you have dimensions of your shield i could see if these would work for you. Matt

Posted By: Manure Queen
Date Posted: 16 Sep 2012 at 7:53pm

Thanks so much, Matt. The driveline is at the welder's but I'll call and get the length and diameter. I'm pretty sure if what you have meets the dimensions of the old part numbers, we could be ok.