Unknown Items Obtained With A Model G - 1
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54183
Printed Date: 11 Sep 2025 at 1:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Unknown Items Obtained With A Model G - 1
Posted By: Scott(GA)
Subject: Unknown Items Obtained With A Model G - 1
Date Posted: 25 Jul 2012 at 12:14pm
|
When I recently acquired a Model G it came with a pile of "stuff". Some of the stuff has been identified; some not.
Below is an item that I haven't been able to ID. It may not be Allis-Chalmers.
I'd be interested in this group's thoughts.
I'll have another set of pictures posted shortly.
Scott
    |
Replies:
Posted By: Allis-chalmers wd45
Date Posted: 25 Jul 2012 at 1:59pm
|
Looks almost like a plow part |
Posted By: DMiller
Date Posted: 25 Jul 2012 at 2:02pm
| I was gonna say that, looks really similar but not the same as the guide rails for the disc openers for my 4 bottom |
Posted By: Dave Richards (WV)
Date Posted: 25 Jul 2012 at 3:03pm
| I think is is a left or right tool bar for the furrowing bar. |
Posted By: Scott(GA)
Date Posted: 25 Jul 2012 at 4:03pm
Dave,
Do you mean the rear furrowing bar?
If so I have to push back a little. I've never seen one with the "arrow-head" on the end like this thing has.
Best regards,
Scott |
Dave Richards (WV) wrote:Posted By: Allis-chalmers wd45
Date Posted: 25 Jul 2012 at 4:05pm
| Exactly what I thought |
Posted By: Scott(GA)
Date Posted: 26 Jul 2012 at 2:03pm
I got the pile of stuff a little more organized and found one of these with a clamp attached to the "arrowhead". Thougt I'd add a picture of that to see if that helps anyone figure out what this thing is.
Best regards.
Scott
|
Posted By: Bill Long
Date Posted: 26 Jul 2012 at 2:56pm
|
The rear furrowing bar came with parts that took out the wheel marks. This looks a little more sophisticated. There is an attachment for a hoe and what looks like a bolt attachment on the end. It does not look like any part I am that familiar with. However, I have a G implement book at home. Perhaps I can find it there when I get home. Good Luck! Bill Long |
Posted By: allisrutledge
Date Posted: 26 Jul 2012 at 4:13pm
|
Looks a lot like it is off a 2 row WD or 45 cultivator. Check the bore size of the clamp they were larger than the G shanks. Scott ------------- Allis Chalmers still exist in my mind and barns |