Print Page | Close Window

WD-45 Fan/Waterpump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160829
Printed Date: 26 Sep 2025 at 4:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WD-45 Fan/Waterpump
Posted By: Prairie Homer
Subject: WD-45 Fan/Waterpump
Date Posted: 09 May 2019 at 6:16pm
How do I pull the Fan/adjustment hat from my WD-45 waterpump? The bolts are off but the fan/pully seems seized to the pump shaft.


Replies:
Posted By: acd17toy
Date Posted: 09 May 2019 at 6:40pm

 With a board using a hammer gently tap the board when it is up against the back side of the pulley, should come loose after a couple of hits, if not rotate the pulley and hit it again.

Posted By: old farmer
Date Posted: 09 May 2019 at 7:41pm
Could use a bit of heat to help


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net